TechniSat TECHNISTAR K4 ISIO Kurzanleitung Seite 151

7.4 Changing a setting
You can create settings using the
by using the virtual keyboard
setting. This is evident on account of the following displayed symbols:
- Arrow selection method
Arrows are shown on the left or right edge of the highlight.
- Selection list
The symbol is shown on the right edge of the highlight.
- Entering numbers
- Virtual keyboard
The symbol is shown on the right edge of the highlight.
7.4.1 Arrow selection method
> If is shown on the left and
arrow keys .
7.4.2 Selection list
If is shown on the right next to the set value, the value can be changed using the selection list.
> Pr ess the OK button to open the selection list.
> Highlight the s etting you want using the
By pressing the
move upwards and downwards page by page
> Con rm by pressing the
the menu.
22
arrow selection method
. The device speci es the method that can be used to change a highlighted
(Section 7.4.1)
(Section 7.4.2)
(Section 7.4.3)
(Section 7.4.4)
on the right next to the set value, you can alter this using the
up/down arrow keys, it is possible to move the highlight from line to line and to
OK button. The selection list closes again and the selected setting is shown in
, the selection list , by entering numbers
up/down arrow keys .
using the page up/down buttons.
and
left/right