TechniSat TECHNISTAR K4 ISIO Kurzanleitung Seite 165

8.15.8 Search engine
> By using Option Selection
automatically called up. You can change the search engine under Menu > Settings > Special
8.15.9 Status
The status display gives you a quick overview of the technical details for the active web page.
> To do so, select the
> Using the up/down arrow keys
display by pressing the
8.15.10 Ending the Internet session
> To switch from a web page you have called up back to normal mode, press the
times or press the
9 DVR mode
The DVR function ( DVR =Digital V ideo R ecorder) means you no longer have to use an external recorder (e.g.
video or DVD recorder) to record programs, as you can use this function to record them to a USB storage device.
The recording capacity thus depends on the volume of data in the broadcast material and the size of the
storage medium.
W hen doing so, pay careful attention to the information and settings in the operating instructions.
9.1 DVR recording
Bef ore starting a DVR recording, please de ne which storage medium should be used as a
recording medium.
The following recording modes are available for DVR recording:
1. Record immediately
Select this type of recording to immediately record the program currently being broadcast at the push of
a button.
2. Timer-controlled recording
This function is used to switch your digital receiver on and o to record the selected program onto the
recording medium while you are out. The timer can be either manually programmed or automatically
programmed via the SFI function.
3. Timeshift recording
Timeshift recording enables timeshifted TV viewing. You can start to play back a program while it is still
recording (= timeshifting).
36
to call up the Web search item, the search engine web page selected is
Status option in Options Selection .
, you can select the
OK button.
TV/Radio button.
general status or the secure status and then
functions > Int ernet.
WWW button three