TechniSat TECHNISTAR K4 ISIO Kurzanleitung Seite 153

You can now enter the term you want as follows.
Arrow keys:
OK:
/ Yellow function key:
/ Red function key:
/ Green function key:
/ Blue function key:
:
The SMS keyboard is operated using the
keyboard and can be used at any time. The colored buttons thus incorporate the functions described above.
> Pr ess one of the
After pressing a
> Every time the same
Press until you reach the character you want. This will be added to the entered term after a
short delay.
The various numeric pad keys
characters and symbols.
0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
Once you have reached the eld you want with the highlight, you can then begin selecting the next
character immediately since, in this case, the character is directly added to the term.
If y ou wish to continue directly selecting a character from the same
previously highlighted character to the term by pressing the
7.5 Option selection
In some menus and operating modes (e.g. TV mode, music/images playback etc.), you have the option of
calling up additional functions and options via the options selection function.
24
Moves the highlight over the keys of the virtual keyboard.
The highlighted character is added to the end of the term, or the
highlighted function is executed.
The keyboard switches between upper case/lower case.
Pr essing/holding down deletes the character in front of the orange
highlight/the entire entry.
The entered term is accepted.
The keyboard switches to the alternative characters.
Moving the blue highlight within the term.
numeric keypad
0 - 9 number keys to select the various letters, numbers, characters and symbols.
numeric pad key once, the rst letter in the corresponding row is highlighted.
numeric pad key is pressed, the highlight moves one eld to the right.
are assigned the following displayed letters, numbers,
on both the alphabetical and the QWERTY
numeric pad , you can add the
right arrow key .