TechniSat TECHNISTAR K4 ISIO Kurzanleitung Seite 144

> Use the up/down arrow keys
press the OK button.
> Now create the settings as described in the network settings section of the
> Pr ess the Info button to accept the settings.
The network con guration check starts over.
Channel search
In the channel search, you select whether to search only free-to-air channels (
free-to-air and encoded channels (
> Use the up/down arrow keys
as encrypted channels, or
> Con rm by pressing
This procedure may take several minutes. Please note all messages displayed on the screen.
Software update
The digital receiver will now check whether a new version of the software is available for the receiver. If a
new software version is available, you can carry out an automatic software update.
> If y ou do not want to wait for a search for new software or a software download, you can skip this
step if you wish by pressing the button
If the s earch for new software or updates is skipped, your device will run another test later and
automatically download the software, as long as this setting is left active and the device is in standby
mode at that set time.
to select whether you want to con gure a LAN or WLAN network and
all channels ).
to highlight the All Channels
All Unencrypted Channels
OK , to start an automatic channel scan.
Info .
all unencrypted channels
eld if you wish to scan for free-to-air as well
if you only want to search for free-to-air channels.
operating manual .
) or
15