TechniSat TECHNISTAR K4 ISIO Kurzanleitung Seite 157

Filter
By setting one or more lters, you can limit the display to certain channels that ful ll the desired criteria.
>
Highlight the Filter option and press the
>
Now select the desired lter group and press the
> Now select the desired lter option from the list that appears and con rm the selection using the
OK button.
The channel list now only shows the channels that t the desired criteria.
In order to lter the list further, follow the above steps again and set more lters this way.
To remove all lters
>
Open the Options menu using the
>
Select the Filter option and press the
>
Now select [Reset all lters]
The full channels list is now displayed again.
8.3.4 Calling up blocked channels
If a channel is selected that is blocked by the parental control function, the
displayed on the screen.
> Use the numeric keypad keys
The selected channel can now be viewed.
or
> Switch to a channel that is not blocked.
If glob al parental control is enabled, the device PIN code will be requested again when the blocked
channel is switched on. To make things easier for you, you only need enter the PIN code once during
each operating phase.
When doing so, pay careful attention to the information and settings for global and user-dependent
parental control (TechniFamily) in the operating manual.
28
OK button.
OK button once more.
OPT button.
OK button.
and press the OK button.
to enter the device PIN.
device PIN message will be