Priority For The Brightness Control; Freezing" Of The Picture (Still Picture); Selecting The Still Picture Mode - Monacor SECURITY TVCCD-700COL Bedienungsanleitung

8.9.2 PRIORITY – priority for the brightness control
GB
Via this menu item it is defined which method takes
priority for the brightness control, after the possibili-
ties by the iris control have fully been utilized. Use
the keys and
"AGC".
8.9.3 FREEZE – "freezing" of the picture (still picture)
After selecting the function "FREEZE", use the key
or to "freeze" the picture as a still picture
(= ON) or to show the current camera picture again
(= OFF). It depends on the adjustment of the next
item "FREEZE MODE" if a field or a frame is shown
as a still picture.
8.9.4 FREEZE MODE – selecting the still picture mode
After selecting the function "FREEZE MODE", use
the keys and
is to be shown as a still picture. Switching is also
possible during a still picture.
8.9.5 GAMMA – selecting the gamma correction
After selecting the function "GAMMA", use the keys
and to adjust the desired gamma correction
factor "GAMMA.1" = 0,45 (standard correction value
for picture tubes) or "GAMMA.2" = 1.
34
to select "SENSE UP" and
to select if a FIELD or a FRAME
8.9.6 LANGUAGE – selecting the menu language
After selecting the function "LANGUAGE", use the
keys and to select the languages English,
Chinese, and Japanese for the menu text.
8.9.7 DEFAULT – reset to the factory settings
This function resets the camera to the settings of the
manufacturer.
Attention: The function deletes all adjustments
made by the user unretrievably and replaces them
by the factory settings.
After selecting the function "DEFAULT", use the key
or to select "ON" and confirm with the key .
8.9.8 MOTION – motion detection
This function shows when movements occur in the
defined areas.
For this purpose the picture is subdivided into 48
zones for which it can be determined individually if
they are to be of importance for the motion detec-
tion. If the menu item "MOTION" is selected, use the
key or to switch the function on (= ON>) or
OFF. If "ON>" has been selected, use the middle key
to call the "MOTION" submenu: