Enlargement Of The Picture Centre - Monacor SECURITY TVCCD-700COL Bedienungsanleitung

Page 2:
** OPTION ** (2/2)
POSI/NEGA
H-REV
V-REV
MASK
APC
COMM.ID
RETURN
Like in the main menu, the menu items are selected
with the keys and
To change to the respectively other page, press
the key with the selected last menu item of a
page or press the key
item of a page.
The menu items of the OPTION menu are de-
scribed in the following. To exit the OPTION menu,
select the menu item "RETURN" at the end of the
second page and confirm with the key .
POSI
OFF
OFF
SET>
SET>
SET>
.
with the selected first menu
8.9.1 ZOOM – enlargement of the picture centre
The function "ZOOM" allows a digitally enlarged rep-
resentation of the middle picture area. The enlarge-
ment can be adjusted in 8 steps up to the maximum
of double zoom.
With the menu item "ZOOM" selected, use the
key or to switch the zoom function on (= ON>)
or OFF. If "ON>" is selected, the enlargement factor
can be defined via the following submenu after
pressing the key :
** ZOOM **
WIDE/TELE
RETURN
Adjust the enlargement factor with the keys
at "WIDE/TELE". Moving to the right increases
the representation (tele), moving to the left reduces
the representation (wide angle).
To return to the main menu, select the function
"RETURN" with the key
middle key .
———+————
and
and confirm with the
GB
33