Ec Declaration Of Conformity - Nice Neomat T Installation

7) Technical specifications of the NEOMAT-MT and NEOMAT-LT tubular motors
Supply Voltage and Frequency
Current and power
Torque and speed
Motor diameter:
Precision (Resolution) of the electronic limit switch
Precision of the stop positions
Mechanical resistance
Continual operating time
Protection class
Working temperature
Length of connection cable
Signal voltage (step-by-step, TTBUS...)
Wind sensor (anemometer) levels
Sun sensor levels
Length of signal cables (step-by-step, TTBUS...)
Radio receiver frequency
Radio receiver coding
No. of transmitters that can be memorized
Range of ERGO, PLANO and NICEWAY transmitters
* The capacity of the transmitters is strongly influenced by other devices with continuous transmissions which operate at the same frequen-
cy. These include alarms, headphones, etc... which interfere with the receiver.
Nice S.p.a. reserves the right to modify its products at any time it deems necessary.

EC Declaration of conformity

according to the directive 1999/5/EC
Note: The content of the present declaration corresponds to the latest available revision, - before the printing of the present manual, - of the doc-
ument registered at the head offices of Nice S.p.a. The original text of this manual has been readapted for publishing reasons
Number: 223/Neomat T
The undersigned Lauro Buoro, managing director, declares under his sole responsibility that the following product:
Manufacturer's name:
Address:
Type:
Models:
Accessories:
Satisfies the essential requirements of the following Directives:
• 1999/5/EC; DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9th March 1999 concerning radio equip-
ment and telecommunications terminal equipment and mutual recognition of their conformity.
According to the following harmonised standards: EN 300220-3 V1.1.1:2000, EN 60950-1:2001
Satisfies the essential requirements of the following Directives, as amended by the directive 93/68/EEC of the European Council of 22
1993:
• 73/23/EEC; DIRECTIVE 73/23/EEC OF THE EUROPEAN COUNCIL of 19th February 1973 for the harmonization of the legislation of mem-
ber States regarding electrical equipment designed to be used within certain voltage limits.
According to the following harmonised standards: EN 60335-1:1994; EN 60335-2-97:2000, EN 50366:2003
• 89/336/EEC; DIRECTIVE 89/336/EEC OF THE EUROPEAN COUNCIL of 3rd May 1989, for the harmonization of the legislations of mem-
ber States regarding electromagnetic compatibility.
According to the following standards: EN 301 489-1:2004; EN 301 489-3:2002
Oderzo, 2 January 2006
14
: See the technical data on the label attached to each model
: See the technical data on the label attached to each model
: See the technical data on the label attached to each model
: NEOMAT-MT =45mm; NEOMAT-LT =58mm
: greater than 0.55° (depending on the NEOMAT-T version)
: Class 2 (±5%)
: in accordance with EN 14202
: Maximum 4 minutes
: IP 44
: -20÷55 °C
: 3 m
: Approx. 24Vdc
: 5: approx. 5, 10, 15, 30 or 45 km/h with VOLO OR VOLO-S anemometer
: 5: approx. 5, 10, 15, 30 or 45 Klux with VOLO-S
: max. 30m if near other cables, otherwise 100m
: 433.92 MHz
: 52 Bit rolling code FLOR and FLOR+INFO
: 14, including a maximum of 3 VOLO-S-Radio climatic sensors
: Estimated 150 m in the open and 20 m inside buildings *
Revision: 2
NICE s.p.a.
Via Pezza Alta 13, 31046 Z.I. Rustignè, Oderzo (TV) Italy
Tubular gearmotor for box awnings with incorporated control unit and radio receiver
Neomat MT, Neomat LT
ERGO, PLANO, NICEWAY, VOLO-S-Radio series radio control devices
VOLO, VOLO-SR anemometers
Lauro Buoro
(Managing Director)
nd July