Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Characteristics; Ce Declaration Of Conformity - Nice NL085K0DC Installierungs-Und Gebrauchsanleitungen Und Hinweise

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 36

TECHNICAL CHARACTERISTICS

Note • All technical specifications stated herein refer to an ambient temperature of
20° C (± 5° C). • Nice SpA reserves the right to apply modifications to the product
at any time when deemed necessary, maintaining the same intended use and
functionality.
Motor model NL08500DC
■ Power (Vdc): 24
■ Max current draw (A): 12
■ Max power draw (W): 300
■ Max Torque (Nm): 60
■ Speed (rpm): 20
■ Continuous run time (min): 4
■ Operating temperature (°C Min): -20
■ Available travel / Max revolutions of output shaft: 8
■ Length (L) (mm): 390
■ Cable length (m): 3
■ Motor weight (kg): 3.6
■ Dimensions of individual package (mm): 450 x 350 x 130
■ Protection rating: IP44
■ Use in acid, saline or potentially explosive atmosphere: No
Controller model MC524S
■ Power: 230Vac (+10, -15%); 50/60Hz
■ Max current draw (A): 1.2
■ Max power draw (W): 260
■ Max power draw in standby (W): 8
■ Emergency power supply: Yes (PS124 battery)
■ Operating temperature (°C Min ÷ Max): -20 ÷ +50
■ Controller weight (kg): 5.6
■ Dimensions of controller (mm): 300 x 230 x 125
■ Protection rating: IP40
■ Courtesy light: 12V/21W BA15S fitting.
■ Flasher output: For 1 LUCYB flasher; MLB or MLBT (bulb 12V, 21W). Note –
The output voltage varies from 17V to 35V.
■ BlueBUS output: One output with maximum load 12 BlueBUS units.
■ STOP input: For normally closed or normally open contacts or for constant
resistance of 8.2 kohm; with self-recognition (any variation from the memorised
status causes the "STOP" command).
■ Step-by-Step input: For normally open contacts (the closing of the contact
causes the "STEP-BY-STEP" command).
■ OPEN input: For normally open contacts (the closing of the contact causes the
"OPEN" command).
■ PHOTO input: For normally closed contacts (opening the contact while the door
is closing causes the OPEN command).
■ Radio ANTENNA input: 52 Ω for RG58 or similar type of cable.
■ Programming input: For 1 OVIEW programmer with telephone cable (4 wire)
and RJ14 connector.
■ Radio fitting: SM connector for SMXI, SMXIS and OXI receivers.
■ Programmable functions: 8 ON-OFF and 8 adjustable functions.
■ Recognition functions: • Self-recognition of devices connected to the Blue-
BUS output. • Recognition of the type of "STOP" device (NO or NC contact or
8.2 kohm resistance). • Recognition the door opening and closing positions and
calculation of the slowdown and partial opening points.
■ Use in acid, saline or potentially explosive atmosphere: No.

CE declaration of conformity

Nice S.p.A. hereby declares that the products: Kit NL085K0DC (MC524S,
NL085000DC, SMXI, PS124) are conforming with the essential requisites and other
pertinent provisions of directives: 1999/5/EC (for SMXI); 2006/95/EC, 2004/108/
EC (for MC524S, NL085000DC, PS124). The CE declaration of conformity can be
viewed and printed out at www.nice-service.com or may be requested directly form
Nice S.p.A.
Mr. Luigi Paro (Managing Director)
8
English –

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis