Troubleshooting - Scheppach MTE370 Bedienungsanleitung

14. Troubleshooting guide
Fault Possible causes
Motor does not start
a) No electricity in plug
b) Cable defective
c) Switch, switch/plug block defective
d) Connections to motor or capacitor
e) Blade roller blocked
Engine performance
drops
a) Soil is too firm
b)Carbonbrushes worn out
c) Roller badly worn
The Electric Tiller is dif- a) roller worn
ficult to check. b) Wrong working depth
Motor is running, roller is a) Gearing defective
not rotating
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
disconnected
Rectification
a) Check line and fuse
b) Have machine checked by a customer ser-
vice center
c) Have machine checked by a customer ser-
vice center
d) Have machine checked by a customer ser-
vice center
e) If necessary adjust working depth. Clean
housing so that the roller can run freely
a) Change working depth
b) Check by a customer service center
c) Replace roller
a) Replace roller
b) Correct working depth
a) By customer service workshop
GB 27 27