Setting The Language; Setting The Time - SciCan HYDRIM M2 G4 Bedienerhandbuch

5. Instructions for Use (cont.)

5.7 Setting the language

The messages displayed by your HYDRIM can be presented in a number of different
languages. To change the current language, follow these steps:
1.
2.
Scroll to
3.
From the LANGUAGE screen, press
When you have found the desired language, press
to the Setup menu.
5.8 Setting the country
1.
2.
Scroll to
3.
Using the keypad, type the name of the country and press
to save and return to the Setup menu.

5.9 Setting the time

1.
2.
Scroll to
3.
From the TIME screen, use the keypad to set the time. Press
to return to the Setup menu.
NOTE: If the HYDRIM is connected to a network, it is important to also enter the correct
Time Zone. Enter the Time submenu, select Time Zone and scroll and select your local
time zone.
4.
To change your unit to display 12-hour time format (24-hour time format is the default
setting), go to the Setup menu and use
toggle to 12. Press
5.
To activate daylight savings time (DST), go to the Setup menu and use
to DST ON/OFF and select. Use
to save and return to the Setup menu.
Language
and select.
Country
and select.
Date / Time
Date / Time and select TIME.
to save and return to the Setup menu.
to scroll through the list of languages.
to save your selection and return
to scroll to TIME 12/24, select it and
to toggle DST ON or OFF and press the
19
to select. Press
EN
to save and
EN
to scroll