Storing And Retrieving Cycle Information - SciCan HYDRIM M2 G4 Bedienerhandbuch

6. Storing and Retrieving Cycle Information

The HYDRIM M2 G4 has an internal Data Logger capable of storing all the data on every
cycle, whether successful or incomplete, for the lifetime of the unit. You can access this
information through the touchscreen, through the web portal or by using a USB storage
device.
6.1 Retrieving cycle information using the touchscreen
1. From the main menu, press the USB icon.
2. The unit will record up to the last fi ve successful cycles and the last fi ve incomplete
cycles.
If you select a cycle from the list, it will display cycle information in a format similar to
how it would be printed.
3. Use the arrow keys to scroll through and read.
NOTE: Regardless of whether you have a USB storage device attached to the unit or not,
you can always see the last fi ve successful cycles and the last fi ve incomplete cycles.
Use the HYDRIM M2 G4 web portal to access all the cycle information stored on your
HYDRIM from your computer. To connect your HYDRIM see section 5.23 Connecting to
a Network.
29