Chapter X Conductivity Technique; Conductivity Setup Menu - Thermo Scientific Orion Star series Bedienungsanleitung

Chapter X

Conductivity Setup Menu

Note: Refer to the Conductivity Setup Menu section for the Setup Menu
Table, which contains a complete list of meter setup options and descriptions.
Refer to Appendix A for a description of the special setup menu features.
1 . In the measurement mode, press
2 . Press /
on the top line .
3 . Press to accept the selection and move the arrow icon to the middle line .
4 . Press /
compensation type,
temperature compensation,
dissolved solids measurement,
conductivity probe,
compensation and
5 . Press to accept the selection and move the arrow icon to the bottom line .
6 . To scroll through a list of options on the bottom line, press
desired option is displayed . To enter a numeric value for an option on the bottom
line, press
7 . Press to accept the selection and move the arrow icon to the top line .
8 . Repeat steps 3 through 7 to change another conductivity setting or press
to return to the measurement mode .
Thermo Scientific Orion Star
Conductivity Technique
to scroll through the setup menu until
to scroll through setup options:
for the temperature coefficient value used for
for the reference temperature used for temperature
for the conductivity cell type .
/ to adjust each digit and
and Star Plus Meter User Guide
™
.
for the temperature
for the TDS factor value used for total
for the nominal cell constant value of the
to move to the next digit .
is displayed
/ until the
EN-39