Ise Setup Menu - Thermo Scientific Orion Star series Bedienungsanleitung

Chapter XI

ISE Setup Menu

Note: Refer to the ISE Setup Menu section for the Setup Menu Table,
which contains a complete list of meter setup options and descriptions.
Refer to Appendix A for a description of the special setup menu features.
1 . In the measurement mode, press
2 . Press /
top line .
3 . Press to accept the selection and move the arrow icon to the middle line .
4 . Press /
for the ISE measurement units,
and for the non-linear blank correction feature .
5 . Press to accept the selection and move the arrow icon to the bottom line .
6 . To scroll through a list of options on the bottom line, press
desired option is displayed . To enter a numeric value for an option on the bottom
line, press
7 . Press to accept the selection and move the arrow icon to the top line .
8 . Repeat steps 3 through 7 to change another ISE setting or press
to the measurement mode .
Thermo Scientific Orion Star
ISE Technique
to scroll through the setup menu until
to scroll through
/ to adjust each digit and
and Star Plus Meter User Guide
™
.
for the ISE measurement resolution,
for the ISE calibration range
to move to the next digit .
is displayed on the
/ until the
to return
EN-45