Rdo Optical Dissolved Oxygen Temperature Display And Calibration - Thermo Scientific Orion Star series Bedienungsanleitung

RDO Optical Dissolved Oxygen Technique
®
RDO Optical Dissolved Oxygen Temperature
Display and Calibration
RDO Optical Dissolved Oxygen Temperature Display
Star Plus meters allow the temperature to be viewed on individual measurement
lines in addition to the temperature display on the top, left of the screen .
To view the temperature for the RDO dissolved oxygen measurement line:
1 . In the measurement mode, press
The arrow icon will point to the selected line .
2 . Press /
be changed to display dissolved oxygen (% saturation), dissolved oxygen (mg/L),
barometric pressure (no icon), temperature (no icon) or a blank line .
RDO Optical Dissolved Oxygen Temperature Calibration
The temperature calibration mode of the Star Plus meter allows the temperature
on each measurement line to be manually adjusted .
To calibrate the temperature for the RDO dissolved oxygen measurement line:
1 . In the measurement mode, press
and press
2 . Press to begin the calibration .
3 . When the reading stabilizes, the arrow icon and the first digit will flash .
Enter the temperature by pressing
to move to the next digit .
4 . Press to save and end the calibration .
EN-38
to change the value on the selected line . The bottom line can
/ until the temperature is displayed .
Thermo Scientific Orion Star
to choose the bottom display line .
to choose the bottom measurement line
/ to adjust each digit and
and Star Plus Meter User Guide
™