Chapter Iv Meter Preparation; Installing The Power Adapter - Thermo Scientific Orion Star series Bedienungsanleitung

Meter Preparation
Chapter IV

Installing the Power Adapter

The universal power adapter that is included with your benchtop meter is the only
power adapter recommended for use with this unit . The use of any other power
adapter will void your meter warranty . The external electrical power adapter is rated
to be operated at 100 to 240 VAC, 0 .5 A, 50/60 Hz .
Based on your wall outlet, select one of the four plug plates provided and slide
it into the grooves on the adapter . A click will be heard when the plug is properly
in place .
Connect the output plug of the power adapter to the power input on the benchtop
meter . Refer to the diagram in the Connecting the Electrodes section .
Batteries can be installed in the benchtop Orion Star or Star Plus series meters,
so the meter setup settings are protected if the meter is disconnected from the
wall outlet or a brief power outage occurs .
Thermo Scientific Orion Star and Star Plus Meter User Guide EN-7
™