Chapter X Conductivity Technique; Conductivity Setup Menu - Thermo Scientific Orion Star series Bedienungsanleitung

Chapter X

Conductivity Setup Menu

Note: Refer to the Setup Menu section for the Setup Menu Table, which contains
a complete list of meter setup options and descriptions. Refer to Appendix A for a
description of the special setup menu features.
1 . In the measurement mode, press
2 . Press /
the top line .
3 . Press to accept the selection and move the arrow icon to the middle line .
4 . Press /
for the temperature coefficient value used for
compensation,
solids measurement,
conductivity probe,
compensation and
5 . Press to accept the selection and move the arrow icon to the bottom line .
6 . To scroll through a list of options on the bottom line, press
desired option is displayed . To enter a numeric value for an option on the bottom
line, press
7 . Press to accept the selection and move the arrow icon to the top line .
8 . Repeat steps 3 through 7 to change another conductivity setting or press
return to the measurement mode .
Thermo Scientific Orion Star
Conductivity Technique
to scroll through the setup menu until
to scroll through
for the TDS factor value used for total dissolved
for the nominal cell constant value of the
for the reference temperature used for temperature
for the conductivity cell type .
/ to adjust each digit and
and Star Plus Series Meter User Guide
™
.
for the temperature compensation type,
to move to the next digit .
is displayed on
temperature
/ until the
EN-39
to