Chapter Viii Polarographic Dissolved Oxygen Technique; Polarographic Dissolved Oxygen Setup Menu - Thermo Scientific Orion Star series Bedienungsanleitung

Chapter VIII

Polarographic Dissolved Oxygen Setup Menu

Note: Refer to the DO Setup Menu section for the Setup Menu Table,
which contains a complete list of meter setup options and descriptions.
Refer to Appendix A for a description of the special setup menu features.
1 . In the measurement mode, press
2 . Press /
on the top line .
3 . Press to accept the selection and move the arrow icon to the middle line .
4 . Press /
for the mg/L concentration resolution,
manual),
for the salinity compensation type (automatic or manual),
salinity correction value and
5 . Press to select the option and move the arrow icon to the bottom line .
6 . To scroll through a list of options on the bottom line, press
desired option is displayed . To enter a numeric value for an option on the bottom
line, press
7 . Press to accept the selection and move the arrow icon to the top line .
8 . Repeat steps 3 through 7 to change another dissolved oxygen setting or press
to return to the measurement mode .
Thermo Scientific Orion Star
Polarographic
Dissolved Oxygen Technique
to scroll through the setup menu until
to scroll through
for the manual barometric pressure compensation value,
/ to adjust each digit and
and Star Plus Meter User Guide
™
.
for the % saturation resolution,
for the barometer type (automatic or
for the dissolved oxygen calibration type .
to move to the next digit .
is displayed
for the manual
/ until the
EN-25