Parts List; Important Safety Instructions; Ups Location Warnings - Tripp Lite SmartOnline SUINT1000LCD2U Bedienungsanleitung

Overview
Tripp Lite SmartOnline Rackmount UPS Systems with interactive LCD interface feature online, double-conversion UPS protection with full-
time sinewave output and zero transfer time suitable for all advanced networking applications. Each system provides long running battery
support with optional extended-run and SNMP/Web communications ability. Built-in interfaces include USB, RS-232 serial and
Emergency Power Off (EPO). The interactive front panel LCD screen provides detailed UPS status, preset and control options. Optional
max efficiency and auto-adaptive power strategy options enable high-efficiency operation with reduced power consumption and BTU heat
output.

Parts List

UPS System
USB Cable
Additional Accessories (All Models; Optional)*
• SNMPWEBCARD: Internal network interface card for SNMP/Web control and monitoring
• ENVIROSENSE: Temperature/humidity sensor for use with SNMPWEBCARD
• SRSWITCH: Rack door sensor for use with ENVIROSENSE and SNMPWEBCARD
• 2POSTRMKITWM: Supports rackmount UPS and battery packs in 2-post rackmount or wall-mount configurations
• 2-9USTAND: Supports rackmount UPS and battery packs in upright tower configuration (SUINT3000LCD2U and SU3000LCD2UHV not
supported)
* Select models are also shipped with optional Input/Output adapter cables.
Model Specific Accessories (Optional)*
UPS Model
"SMART" External
Battery Packs**
"NON-SMART" External
Battery Packs**
*Visit the specification page for your UPS system at www.tripplite.com for detailed extended runtime data and additional accessory options.
** For External battery configuration, see the Operations section for options and configuration method. SMART battery packs are automatically detected by the UPS.

Important Safety Instructions

SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during the installation, operation and storage of all
Tripp Lite UPS Systems. Failure to heed these warnings may affect your warranty.

UPS Location Warnings

• Install your UPS indoors, away from excess moisture or heat, conductive contaminants, dust or direct sunlight.
• For best performance, keep the indoor temperature between 32º F and 104º F (0º C and 40º C).
• Leave adequate space around all sides of the UPS for proper ventilation.
• Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner will seriously inhibit the
unit's internal cooling, eventually causing product damage not covered under warranty.
SUINT1000LCD2U SUINT1500LCD2U
BP24V36-2US BP36V27-2US
BP24V15RT2U (limit 1)
BP36V15-2U (limit 1)
BP24V28-2U (limit 1)
BP36V42-3U
BP24V70-3U
Bolt-on Mounting Ears (2)
RS-232 Cable
SUINT2200LCD2U
BP48V27-2US
BP48V24-2U (limit 1)
BP48V60RT3U
2
4-Post Rail Kit
Owner's Manual
Owner's Manual
SUINT3000LCD2U / SU3000LCD2UHV
BP72V18-2US
BP72V15 (limit 1)
BP72V28RT3U