Control Elements And Interfaces - Honeywell EW701 Bedienungs- Und Montageanleitung

Control elements and interfaces

(1) The display is always off as standard (sleep mode).
• Press the < H > or < V > key briefl y to open the "fast readout" display loop.
• Press the < H > or < V > key longer than 3 seconds to open the "level
operating scheme".
Fitting the screw-type meter
• Dismantle the fl ushing tube or existing meter
• Remove old seals
• Dismantle temperature sensor if appropriate
• Remove threaded protective caps
Always use new seals when
installing a new meter!
• Tighten screw fi tting with new seal to max. 45
Nm tightening torque
V1.00 / 3.5.2018
(2) <H> key (horizontal)
(3) <V> key (vertical)
(4) IrDA interface
(5) Interface cover
(6) Module interface
(7) Attachment holes for external
optical modules
(8) User protection
MU2H-0501ge23 R0318 43 EN