Honeywell EW701 Bedienungs- Und Montageanleitung Seite 41

Plugging in the calculator unit
d
You can remove the calculator unit at any time by pulling it off the clip ring.
PLEASE NOTE: When pulling the calculator unit off the clip ring there is
a risk that the connection cable can be damaged by jerking the calculator
unit! Local repair is not possible!
After you have fi tted the fl ow sensor to suit the fl ow direction of the medium
and fi tted to the clip adapter as desired, you can plug the calculator unit into
place.
(1) To do so, wind the excess connection cable around the winding fastener (a).
(2) Then plug the calculator unit onto the clip ring (b).
(3) When plugging the calculator unit into place, the groove in the clip ring
(c) must lie over the top of the groove in the calculator unit (d = view from
below) for the connection cable.
V1.00 / 3.5.2018
c
b
MU2H-0501ge23 R0318
a
41 EN