General Power Tool Safety Warnings; Working Safely - Parkside PTSG 140 A1 Originalbetriebsanleitung

Total vibration value:
Total vibration value as per EN 61029:
Vibration emission value:
Uncertainty K = 1.5 m/s
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons. The
specified vibration emission value can also
be used to make an initial exposure estimate.
WARNING!
► The vibration level will vary according to the
use of the power tool and may sometimes
be higher than the value specified in these
instructions.
Regular use of the power tool in this way may
cause the user to underestimate the vibration.
To estimate the vibration load during a specif-
ic working period accurately, periods during
which the appliance is switched off (or run-
ning, but not being used) must also be taken
into account. This can significantly reduce the
vibration load over the total working period.
PTSG 140 A1
a ≤ 2.5 m/s 2
h
2
General Power Tool
Safety Warnings
CAUTION!
► Read all the safety information, instructions,
illustrations and technical data provided
with this electric tool. Failure to follow the
warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-
operated (cordless) power tool.

Working safely

■ Keep your workspace tidy. Clutter in the work
area can cause accidents.
■ Take account of environmental influences!
Do not expose the power tool to rain. Do not
use the power tool in wet or moist environments.
Ensure that your workspace is adequately lit.
Do not use power tools where there is a risk of
explosion or fire.
■ Protect yourself from electric shocks! Avoid
body contact with grounded surfaces (e.g.
pipes, radiators, electric cookers, refrigerators
and freezers).
■ Keep other people at a distance! Do not allow
other people, especially children, to touch the
power tool or the cord. Keep them out of your
work area.
■ Store unused power tools safely! Unused
electric tools should be placed in a dry, high-up
or closed-off place out of the reach of children.
GB │ IE │
13 ■