Using The Light Without The Power Lead; Using The Light Connected To A Power Supply - LIVARNO LUX Z30503 Bedienungsanleitung

©
©
56632_livx_LED-Arbeitsleuchte_Content_LB3.indd 15
Failure to observe this advice may result in the light falling down
and becoming damaged.
Note: The lamp head can be adjusted through 165° (see Fig. B).
Bring the lamp head
the light at the hinge

Using the light without the power lead

Fully charge the rechargeable light batteries as described in the
section "Charging the rechargeable light batteries".
Press the On / Off switch

Using the light connected to a power supply

Arrange the power lead so that it does not create a trip hazard.
CAUTION DANGER OF ACCIDENT! Do not connect or use
the light if you are in moving traffic, for example driving a vehicle.
The light is not a passenger compartment light or a reading light!
Insert the plug on mains adapter
adapter into the connection socket
13
light.
Insert the mains adapter
the cigarette lighter socket adapter
socket in your vehicle.
Press the On / Off switch
into the desired position by articulating
1
.
3
, to switch on the LED work light.
10 11
or the cigarette lighter socket
14
7
into a 230 V ~ mains socket or insert
14
into the cigarette lighter
13
, to switch on the LED work light.
10 11
Use
in the handle of the
4
GB/IE 15
29.12.10 13:17