Using The Led Torch As Motion Sensor; Using The Led Torch As Light For Orientation - LIVARNO LUX 103738-14-01 Bedienungs- Und Sicherheitshinweise

103738_liv_VDE_LED_Taschenlampe_content_PL_HU.indd 13
Using the LED torch as motion
sensor (see Fig. B)
Plug the LED torch
Plug the charger into the mains socket.
As soon as the motion sensor
movement in dark environments, the side
light switches on again for about 20 sec-
7
onds (+ / - 5 seconds)
Using the LED torch as light
for orientation (see Fig. B)
You can use the LED torch as a light for orienta-
tion in case of a blackout.
Plug the LED torch
Plug the charger into the mains socket. If the
power fails, the side light
serves as a light for orientation. As soon as
there is power on the socket again, the side
light switches off.
onto the charger
2
registers a
5
onto the charger
2
lights up and
7
.
3
.
3
GB 13
15.10.14 10:35