Service; Safety Instructions Specifically For Impact Screwdrivers; Safety Guidelines For Battery Chargers - Parkside PASSK 20-Li A1 Originalbetriebsanleitung

6. Service

a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
Safety instructions specifically for
impact screwdrivers
■
Wear hearing protection when impact
screwing. Exposure to loud noise can lead
to hearing loss.
■ Secure the workpiece! A workpiece securely
held by a clamping device or vice is much safer
than one held in your hand.
■ Hold the power tool firmly. High torques can
occur for brief periods while tightening and
loosening screws.
■ Wait until the power tool has come to a stand-
still before putting it down. The tool can jam,
this leading to loss of control of the power tool.
■ Hold the power tool by the insulated gripping
surfaces, when performing an operation where
the screw or attached tool could come into
contact with hidden wiring. Contact between
the screw or attached tool and a live wire may
cause exposed metal parts of the power tool to
become live and give the operator an electric
shock.
│ GB │ IE
■ 18

Safety guidelines for battery chargers

This appliance may be used by
■
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks. Do not allow
children to use the appliance as a
toy. Cleaning and user maintenance
tasks must not be carried out by
children unless they are supervised.
To avoid potential risks, damaged
■
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person.
The charger is suitable for indoor use
only.
WARNING!
■ To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer, their customer service department or a
similarly qualified person.
ATTENTION!
Hot surface.
There is a risk of burns.
PASSK 20-Li A1