Black Balance Setting [Black Bal]; Synchronization Setting [Sync] - Panasonic GP-US932CSXE Bedienungsanleitung

!1 Black balance setting [BLACK BAL]

The black balance adjustment is generally unnecessary, but the adjustment is available also by hand.
MANU (default): Manually adjusts the black balance.
ABC: Automatically adjusts the black balance.
Top screen of SETUP menu
** SET UP **
SCENE FILE *FILE1
WHITE BAL AWC
BLACK BAL *MANU
SYNC INT
END
When "ABC" is selected, follow the steps below to adjust the black balance.
Step 1
Put the lens cap on the camera lens.
Step 2
Select "ABC", and then press the [SEL] button.
The ABC starts and "ABC" is reversely highlighted.
→
When "MANU" is selected, follow the steps below to adjust the black balance.
Step 1
Put the lens cap on the camera lens.
Step 2
Select "MANU", and then press the [SEL] button.
The "BLACK BAL" screen appears.
→
Step 3
Move the cursor to "R-PED" and adjust "R-PED" with use of
the [e] or [f] button while viewing a vector scope or a
waveform monitor. Adjustment shall be performed so that
the carrier is minimized.

!2 Synchronization setting [SYNC]

The synchronization state is displayed. The horizontal phase for the external synchronization can also be adjusted.
The internal synchronization is indicated as "INT". For the external synchronization, either of "EXT2" or "EXT1" is selectable.
EXT2 (default): Select this setting when connecting this unit mutually.
EXT1: Select this setting when providing the synchronization signal from another device to this unit.
Adjustment of the horizontal phase in the external synchronization mode
Top screen of SETUP menu
** SET UP **
SCENE FILE *FILE1
WHITE BAL AWC
BLACK BAL *MANU
SYNC *EXT2
END
28
"BLACK BAL" screen
P2 ** BLACK BAL **
R-PED
B-PED
RET END
"SYNC" screen
P2
H PHASE
RET END
.... .... 128
|
+
−
.... .... 128
|
+
−
Step 3
When the ABC is completed, "ABC" returns to the normal
display.
Step 4
Move the cursor to "B-PED" and adjust "B-PED" with use of
the [e] or [f] button while viewing a vector scope or a
waveform monitor. Adjustment shall be performed so that
the carrier is minimized.
** SYNC **
.... ....
0
|
+
−