Electronic Shutter Setting [Shutter] - Panasonic GP-US932CSXE Bedienungsanleitung

Manual detection area setting
The detection area is manually specified.
"ELC CONT" screen
** ELC CONT **
AREA *MANU
....
PEAK/AVE
P
RET END
Step 1
Select "MANU" in "AREA" on the "ELC CONT" screen and
press the [SEL] button.
The mask setting screen appears.
→
Step 2
Move the cursor to the target character by pressing the [g],
[h], [e] and [f] buttons, and press the [SEL] button.
The masked area is displayed in white.
→
Note:
• Detection is performed only in the masked areas.
• To cancel a masked area, move the cursor to the area
to be canceled and press the [SEL] button.
To cancel all the masked areas, hold down the [e] and
[f] buttons simultaneously for 2 seconds or more.
e Electronic shutter setting [SHUTTER]
Specifies the electronic shutter speed. The following are available for the speed:
OFF (default), 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 and MANU
Selecting "MANU" and pressing the [SEL] button will display the "SHUTTER" screen for the detailed adjustment of shutter
speed.
The adjusting range is from 10/1350 to 1349/1350.
"SHUTTER" screen
** SHUTTER **
MANU SET 1349/1350
RET END
Note:
• When "SHUTTER" is specified, set "ELC" and "SENS UP" to "OFF" respectively. (
20
Mask setting screen
.... 4
|
A
Step 3
Hold down the [FREEZE MENU ] button for 2 seconds or
more after completing masking areas.
The "ELC CONT" screen appears again.
→
☞ Pages 19 and 21)