Mounting Chair Suspension With Shelf; Unobean-Step 01468; With The Threaded Pins - VS Uno-M-Step Montageanleitung

(6)
(9)
(9)
(6)
(4)

5. Mounting chair suspension with shelf

Uno-M-Step 22405-22410, 22412, 22413

UnoBean-Step 01468

Turn the table top over and lay on a clean assembly surface
(e.g. protective cover, etc.).
- Models 22405 to 22413
Insert the chair suspension
with the threaded pins
thin wire links must point to the table top. Insert
(8)
the middle pin (9) and slide the chair suspension
through completely. Screw down with the washer and
the M8 cap nut.
Caution! In conjunction with the chair suspension do
not mount a top support
22409 (one-seater).
(6)
(7)
(11)
(5)
(8)
(7)
(11)
(8)
from the user side
(5) (4)
into the cross-bar . The
(6) (7)
(11) on the models 22408 and
(12)
(7)
(4)
- Models 01468
First attach the two spacers
(6) of the chair suspension
sion from the user side
(5)
into the cross-bar
(6)
each spacer fits snugly onto the round-tube cross-bar.
The offsets (10) of the chair suspension must point to
the table top. Screw down with the washer and the M8
cap nut.
(7)
(5)
(4)
(10)
(12) to the threaded pins
(5) . Insert the chair suspen-

with the threaded pins

(4)
, making sure the curvature of
(7)
13