VS Uno-M-Step Montageanleitung Seite 10

LIGNOdur
(6)
(5)
2. Screw on the table frame
LIGNOdur
Uno-M-Step 22405, 22408, 22409, 22411
- LIGNOdur one-seater 22408
Place the table frame
top (2) . Align it against the two rows of holes. The
front left fixing position
side (-> off-centre). On each side, use the two
(4)
countersunk-head screws ø 6.3x15.5 mm to screw on
at the outside positions
- LIGNOdur one-seater 22409
Place the table frame
top . Align it against the two rows of holes. The front
(2)
left fixing position (3)
On each side, use the two countersunk-head screws
ø 6.3x15.5 mm to screw on at the outside positions
10
(1)
(7)
(2)
(3)
on the bottom of the table
(1)
(3) is 130 mm from the user
.
(6)
on the bottom of the table
(1)
is 140 mm from the user side
LIGNOdur
(4)
- LIGNOdur two-seater 22405
Position the table top support
user side (4) . Place the table frame
of the table top
holes. The front left fixing position
the user side (4)
two countersunk-head screws ø 6.3x15.5 mm to screw
on at the outside positions
support using a fillister-head screw M6x70 mm.
(7)
- LIGNOdur two-seater 22411
Place the table frame
top . Align it against the two rows of holes. The
(2)
front left fixing position
(4) . side (4) (-> off-centre). On each side and in the middle,
use the two countersunk-head screws ø 6.3x15.5 mm
. to screw on at the outside positions
(6)
(6)
(5)
Model 22411
(7) 260 mm from the
(1) on the bottom
. Align it against the two rows of
(3)
is 130 mm from
(3)
(-> off-centre). On each side, use the
. Screw on the table top
(6)
(1) on the bottom of the table
is 130 mm from the user
(3)
.
(6)