14.2.2 Konfiguration Mit 2,5" Festplattenlaufwerken - Fujitsu PRIMERGY RX300 S3 Bedienungsanleitung

Anhang

14.2.2 Konfiguration mit 2,5" Festplattenlaufwerken

board
Channel 0 (2 Modules)
Channel I (2 Modules)
Channel II (2 Modules)
Channel III (2 Modules)
Memory ( III )
rear side
1. PSU 2. PSU
Redundant power
supply option
RAID 5 support
onboard
Extension slots for
SCSI Controller ( VII )
Disk Array ( VIII )
Communication/Network ( IX )
Miscellaneous ( X )
Slot 5: PCIe x8, Low Profile
Slot 6:
HOT PLUG
Slot 4: PCIe x4, Low Profile (mech. x8)
PCI-X 64
HOT PLUG
Slot 3: PCIe x4, Low Profile (mech. x8)
133 MHz
Slot 2: PCI-X 64-Bit / 133MHz, Low Profile
Standard
Slot 1: PCI-X 64-Bit / 133MHz, Low Profile
short
Bild 92: aus dem Systemkonfigurator 2,5" Festplattenlaufwerke
RX300 S3
Xeon DP
Xeon DP
Processor ( II )
Fan 1 - Fan 4
Fan 5 - Fan 8
Redundant system-
fans option
Licence key + 256MB Cache
Licence key + 256MB Cache+BBU
RISER option
Slot 7: Slot 8:
PCI-X 64 PCI-X 64
133 MHz 133 MHz
Standard Standard
short long
Options Guide
Konfigurationsschema
front side
middle
Bay for LocalView LCD
or 3.5"x 0,5" Floppy disk
Air channel
Bay for 5,25"x 0,5" IDE-CD
or DVD-ROM
Accessible drives ( V )
Hard disk drives ( VI )
2.5" SAS
2.5" SAS
2.5" SAS
2.5" SAS
2.5" SAS
2.5" SAS
2.5" SAS
2.5" SAS
2.5" SAS
2.5" SAS
2.5" SAS
2.5" SAS
111