Tuning The Mw Band - Medion MD 82157 Anleitung

Use the band selector switch to select the desired frequency band (FM,
MW, LW or SW). The corresponding abbreviation appears in the display.
Now tune the receiver to the desired frequency using the
keys.
To start the automatic scan, hold
three seconds.
The automatic scan starts when you release
about three seconds. The automatic scan run stops when a station with
sufficient signal strength is found.

Tuning the MW Band

Press the MODE key six times, and select the band with the
key.
DOWN
Band
FM
SW
LW
Frequency Stepp MW Band:
Country
America
Europe
UP
Freq. Step.
100 kHz
5 kHz
1 kHz
Freq. Step.
10 kHz
9 kHz
UP
or pressed for about
DOWN
or
UP DOWN
UP
Freq. Range
87.0 - 109.0 MHz
5.85 - 17.9 MHz
144 - 299 kHz
Freq. Range
520 - 1710 kHz
522 - 1656 kHz
and
DOWN
after
and
25