Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ANGLE GRINDER
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
drawing on page 2 - 4.
Read this operators guide carefully,
before using the machine. Ensure that
you know how the machine works, and
how it should be operated. Maintain the
machine in accordance with the
instructions, and make certain that the
machine functions correctly. Keep this
operator's guide and other enclosed
documentation with the machine.
Contents
1. Machine data
Technical specification
Voltage
Frequency
Power input
No-load speed
Disc diameter
Spindle dimension
Weight
Lpa (sound pressure)
Lwa (sound power)
Vibration value
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
Ferm
exposure to vibration when using the tool for the
applications mentioned
-
using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
-
the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Contents of packing
1
Angle grinder
1
Side handle
1
Spanner
1
Set carbon brushes
1
Instruction manual
1
Safety instructions
1
Guarantee card
Check the machine, loose parts and accessories
for transport damage.
Features
Fig. 1
1. On/off switch
2. Screw-on lid carbon brush (both sides)
3. Spindle lock
4. Grinding disc
5. Side handle
6. Lock-off button
2. Safety instructions
230 - 240 V~
50 Hz
In this manual and/or on the machine the following
2000 W
symbols are used:
6000 /min
230 mm
M 14
5 kg
93 + 3 dB (A)
104 + 3 dB (A)
5.62 + 1.5 m/s
2
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
Risk of fire
Use spindle lock only in stand still
mode.
EN
5
Werbung
Kapitel
Inhaltsverzeichnis
