Engine Oil Replacement - Yamaha WR400F Fahrer- Und Wartungshandbuch

ENGINE OIL REPLACEMENT

5. Start the engine and let it warm up for
several minutes.
CAUTION:
When the oil tank is empty, never start the
engine.
6. Idle the engine more than 10 seconds
while keeping the motorcycle upright.
Then stop the engine and add the oil to
the maximum level.
7. Install:
ENGINE OIL REPLACEMENT
1. Start the engine and let it warm up for
several minutes.
2. Stop the engine and place an oil pan
under the drain bolt.
3. Remove:
4. Remove:
5. Clean:
3 - 15
Oil tank cap
Oil filler plug 1
Drain bolt (with gasket) 2
Drain bolt (with gasket) 3
Oil filter drain bolt (O-ring) 4
Drain the crankcase and oil tank
(frame) of its oil.
Engine skidplate
Engine oil hose clamp 1
Engine oil hose 2
Oil strainer (frame) 3
Oil strainer (frame)
INSP
ADJ