Maintenance And Care - EOS Zeus series Montage- Und Gebrauchsanweisungen

Maintenance and care

The sauna heating unit is made of low-corro-
sion material. To enjoy your sauna heating unit
for a long time you should ensure maintenance
and take due care about the heater. Always
make sure that the air supply vents and reflec-
tion surfaces in the area of air intake are free.
These can easily become clogged with fuzz and
dust when drawing in fresh air. This reduces the
air convection in the sauna heating unit and
can be a cause of too high temperatures.
Clean or de-scale the heater when needed.
Refer to your sauna supplier or directly to the
manufacturer in case of defects or signs of wear
and tear.
Only use original manufacturer's replacement
parts, which can be obtained from your suppli-
er or directly from the manufacturer.
If you did not use your sauna for a long peri-
od of time, always check before next use that
cloths, cleansers or other objects have not
been left on the sauna heating unit or the va-
porizer before turning them on.
EN
34