Inhaltsverzeichnis
Werbung
ON THE SURFACE BEFORE A DIVE
AN DER OBERFLÄCHE VOR EINEM TAUCHGANG
ON THE SURFACE BEFORE A DIVE
Gauge Surface Main is nearly identical to Dive Mode. Unlike Dive Mode, there will be no residual Tissue Loading Bar Graph after a dive.
ON THE SURFACE BEFORE A DIVE
Gauge-Oberflächen-Haupt ist nahezu identisch mit dem Tauchmodus. Im Gegensatz zum Tauchmodus wird jedoch nach einem Tauchgang keine
Gauge Surface Main is nearly identical to Dive Mode. Unlike Dive Mode, there will be no residual Tissue Loading Bar Graph after a dive.
Gauge Surface Main is nearly identical to Dive Mode. Unlike Dive Mode, there will be no residual Tissue Loading Bar Graph after a dive.
verbleibende Sättigung im Gewebesättigungs-Balkendiagramm nicht angezeigt.
ON THE SURFACE BEFORE A DIVE
ON THE SURFACE BEFORE A DIVE
Gauge Surface Main is nearly identical to Dive Mode. Unlike Dive Mode, there will be no residual Tissue Loading Bar Graph after a dive.
Gauge Surface Main is nearly identical to Dive Mode. Unlike Dive Mode, there will be no residual Tissue Loading Bar Graph after a dive.
dive #,
dive #,
0 for none yet
Tauchgang #
dive #,
0 for none yet
0 wenn
0 for none yet
noch keiner
vorhanden
dive #,
dive #,
0 for none yet
0 for none yet
GAUGE SURF MAIN MENU
GAUGE SURF MAIN MENU
To view ProPlus 4.0 logs, change settings, or switch modes you must navigate through the Surf Main Menu. Enter the menu by pressing the ADV
GAUG OBERFLÄCHEN HAUPT MENÜ
GAUGE SURF MAIN MENU
To view ProPlus 4.0 logs, change settings, or switch modes you must navigate through the Surf Main Menu. Enter the menu by pressing the ADV
button. When you reach the end of the menu the ProPlus 4.0 will return to the Gauge Surface Main screen. You may hold the ADV button to scroll
Um die ProPlus 4.0 Logs anzusehen, Einstellungen zu ändern oder zwischen Modis zu wechseln müssen Sie durch das Oberflächen Hauptmenü navigieren. Öffnen
To view ProPlus 4.0 logs, change settings, or switch modes you must navigate through the Surf Main Menu. Enter the menu by pressing the ADV
button. When you reach the end of the menu the ProPlus 4.0 will return to the Gauge Surface Main screen. You may hold the ADV button to scroll
quickly through the selections. Some screens simply display data. While other screens are lead-ins to sub menus and settings. Press the SEL button to
Sie das Menü durch Drücken von ADV. Wenn Sie am Ende des Menüs angelangt sind, kehrt ProPlus 4.0 wieder zum Gauge Oberflächen-Hauptbildschirm zurück.
button. When you reach the end of the menu the ProPlus 4.0 will return to the Gauge Surface Main screen. You may hold the ADV button to scroll
quickly through the selections. Some screens simply display data. While other screens are lead-ins to sub menus and settings. Press the SEL button to
GAUGE SURF MAIN MENU
GAUGE SURF MAIN MENU
choose menus or options from the Main Menu when available.
Sie können den ADV-Knopf halten, um schnell durch die Auswahlen zu blättern. Einige Displays zeigen lediglich Daten an, während andere Einleitungsbildschirme zu
quickly through the selections. Some screens simply display data. While other screens are lead-ins to sub menus and settings. Press the SEL button to
choose menus or options from the Main Menu when available.
To view ProPlus 4.0 logs, change settings, or switch modes you must navigate through the Surf Main Menu. Enter the menu by pressing the ADV
To view ProPlus 4.0 logs, change settings, or switch modes you must navigate through the Surf Main Menu. Enter the menu by pressing the ADV
Untermenüs und Einstellungen sind. Drücken Sie den Knopf SEL, um Menüs oder Optionen aus dem Hauptmenü zu wählen, sofern diese vorhanden sind.
choose menus or options from the Main Menu when available.
button. When you reach the end of the menu the ProPlus 4.0 will return to the Gauge Surface Main screen. You may hold the ADV button to scroll
button. When you reach the end of the menu the ProPlus 4.0 will return to the Gauge Surface Main screen. You may hold the ADV button to scroll
quickly through the selections. Some screens simply display data. While other screens are lead-ins to sub menus and settings. Press the SEL button to
quickly through the selections. Some screens simply display data. While other screens are lead-ins to sub menus and settings. Press the SEL button to
choose menus or options from the Main Menu when available.
choose menus or options from the Main Menu when available.
to select
zum Auswählen
an option
einer Option
to select
an option
ADV
NOTE: The Gauge Surface Main, ALT screens, and Menu options are similar to those described previously for Dive Mode. See the
NOTE: The Gauge Surface Main, ALT screens, and Menu options are similar to those described previously for Dive Mode. See the
Dive Surface Mode chapter for further details.
NOTE: The Gauge Surface Main, ALT screens, and Menu options are similar to those described previously for Dive Mode. See the
Dive Surface Mode chapter for further details.
Dive Surface Mode chapter for further details.
NOTE: The Gauge Surface Main, ALT screens, and Menu options are similar to those described previously for Dive Mode. See the
NOTE: The Gauge Surface Main, ALT screens, and Menu options are similar to those described previously for Dive Mode. See the
INITIATING A DIVE
HINWEIS: Die Gauge Oberflächen Haupt-, ALT-Bildschirme und Menüoptionen sind ähnlich, wie die oben für den Tauchmodus
INITIATING A DIVE
Dive Surface Mode chapter for further details.
Dive Surface Mode chapter for further details.
With the ProPlus 4.0 in Gauge Mode, a dive will commence upon descending to 5 ft (1.5 m) for longer than 5 seconds. Below is a diagram to help
INITIATING A DIVE
beschriebenen. Siehe Kapitel Tauch-Oberflächen-Modus für weitere Details.
With the ProPlus 4.0 in Gauge Mode, a dive will commence upon descending to 5 ft (1.5 m) for longer than 5 seconds. Below is a diagram to help
you navigate Gauge Dive Mode functions. The dive will end and revert to Surface Mode upon ascent to 0.9 m (3 ft) of depth for at least 1 second.
With the ProPlus 4.0 in Gauge Mode, a dive will commence upon descending to 5 ft (1.5 m) for longer than 5 seconds. Below is a diagram to help
you navigate Gauge Dive Mode functions. The dive will end and revert to Surface Mode upon ascent to 0.9 m (3 ft) of depth for at least 1 second.
TAUCHGANG EINLEITEN
you navigate Gauge Dive Mode functions. The dive will end and revert to Surface Mode upon ascent to 0.9 m (3 ft) of depth for at least 1 second.
INITIATING A DIVE
INITIATING A DIVE
Mit dem ProPlus 4.0 im Gauge-Modus beginnt ein Tauchgang nachdem Abtauchen auf 1,5 m (5 ft.) für mindestens 5 Sekunden. Das Diagramm unten
With the ProPlus 4.0 in Gauge Mode, a dive will commence upon descending to 5 ft (1.5 m) for longer than 5 seconds. Below is a diagram to help
With the ProPlus 4.0 in Gauge Mode, a dive will commence upon descending to 5 ft (1.5 m) for longer than 5 seconds. Below is a diagram to help
zeigt, wie Sie durch die Gauge Tauchmodus-Funktionen navigieren können. Der Tauchgang endet und der Oberflächenmodus beginnen, wenn Sie
you navigate Gauge Dive Mode functions. The dive will end and revert to Surface Mode upon ascent to 0.9 m (3 ft) of depth for at least 1 second.
you navigate Gauge Dive Mode functions. The dive will end and revert to Surface Mode upon ascent to 0.9 m (3 ft) of depth for at least 1 second.
während mindestens 1 Sekunde auf 0,9 m (3 ft.) auftauchen.
NOTE: The ProPlus 4.0 will be locked in Gauge Mode for 24 hours after surfacing from a Gauge Mode dive.
NOTE: The ProPlus 4.0 will be locked in Gauge Mode for 24 hours after surfacing from a Gauge Mode dive.
NOTE: The ProPlus 4.0 will be locked in Gauge Mode for 24 hours after surfacing from a Gauge Mode dive.
NOTE: All other Gauge mode dive functions are similar to Norm Mode. See the Norm Dive Mode chapter for further details.
HINWEIS: Der ProPlus 4.0 wird nach dem Auftauchen von einem Gauge-Modus-Tauchgang während 24 Stunden im Gauge-
NOTE: All other Gauge mode dive functions are similar to Norm Mode. See the Norm Dive Mode chapter for further details.
NOTE: The ProPlus 4.0 will be locked in Gauge Mode for 24 hours after surfacing from a Gauge Mode dive.
NOTE: The ProPlus 4.0 will be locked in Gauge Mode for 24 hours after surfacing from a Gauge Mode dive.
NOTE: All other Gauge mode dive functions are similar to Norm Mode. See the Norm Dive Mode chapter for further details.
Modus gesperrt sein.
NOTE: All other Gauge mode dive functions are similar to Norm Mode. See the Norm Dive Mode chapter for further details.
NOTE: All other Gauge mode dive functions are similar to Norm Mode. See the Norm Dive Mode chapter for further details.
HINWEIS: Alle anderen Gauge-Modus Tauchfunktionen sind ähnliche wie im Norm Modus. Siehe Kapitel Tauch-Oberflächen-
Modus für weitere Details.
© Pelagic, 2019
© Pelagic, 2019
© Pelagic, 2019
© Pelagic, 2019
surface interval
surface interval
hr:min
Oberflächenintervall
surface interval
hr:min
(Std:Min)
hr:min
surface interval
surface interval
mode is
hr:min
mode is
hr:min
GAU (Gauge)
Mode ist
mode is
GAU (Gauge)
GAU (Gauge)
GAU (Gauge)
Gas Pressure
mode is
mode is
Gas Pressure
GAU (Gauge)
Gas Pressure
Gasdruck
GAU (Gauge)
Gas Pressure
Gas Pressure
MAIN MENU
MAIN MENU
HAUPTMENÜ
ALT 1 Last Dive
MAIN MENU
ALT 1 Last Dive
(Max Depth, Dive Time)
ADV
ALT 1 Letzter
ALT 1 Last Dive
(Max Depth, Dive Time)
ADV
ALT 2
Tauchgang
(Max Depth, Dive Time)
ADV
ALT 2
(Elevation, Time,
MAIN MENU
MAIN MENU
(Max Tiefe, Tauchzeit)
ALT 2
(Elevation, Time,
Temperature)
ALT 1 Last Dive
ALT 1 Last Dive
(Elevation, Time,
Temperature)
FLY
SEL
ALT 2
(Max Depth, Dive Time)
ADV
Temperature)
(Max Depth, Dive Time)
FLY
SEL
ADV
(Höhe, Zeit,
LOG
ALT 2
FLY
SEL
ALT 2
LOG
Temperatur)
to select
SET ALARMS
(Elevation, Time,
(Elevation, Time,
LOG
SET ALARMS
to select
Temperature)
an option
Temperature)
SET UTIL
FLY
SET ALARMS
FLY
an option
SEL
SET UTIL
FLY
SEL
SET TIME
+
LOG
SET UTIL
ADV
SEL
LOG
SET TIME
LOG
+
to select
SEL MODE
ADV
SEL
SET TIME
SET ALARMS
+
SET ALARMS
SEL MODE
SEL
ADV
SET ALARMS
an option
HISTORY
SEL MODE
SET UTIL
SET UTIL
HISTORY
SET UTIL
SERIAL NUMBER
HISTORY
SET TIME
SERIAL NUMBER
SET TIME
+
SET TIME
+
ADV
SEL
Return to Home
SEL
SERIAL NUMBER
SEL MODE
Return to Home
exit
SEL MODE
Menü
Menu
SEL MODE
exit
Return to Home
Menu
HISTORY
menu
verlassen
HISTORY
exit
menu
HISTORY
Menu
SERIAL NUMBER
SERIAL NUMBER
menu
SERIAL NUMBER
Return to Home
Return to Home
exit
exit
Menu
Zurück zum Start
Menu
menu
menu
Menü
ALT 1
ALT 1
ADV
ALT 2
ALT 1
ADV
ALT 2
ADV
back to Main
ALT 2
back to Main
back to Main
ALT 1
ALT 1
ALT 1
ADV
ADV
ALT 2
ALT 2
ALT 2
back to Main
back to Main
zurück zu Haupt
ADV
SEL
ADV
SEL
ADV
SEL
ADV
SEL
ADV
SEL
ADV
SEL
ADV
SEL
ADV
SEL
backlight
ADV
SEL
ADV
SEL
backlight
38
38
38
38
PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 BEDIENUNGSHANDBUCH
PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL
backlight
backlight
Displaybeleuchtung
backlight
backlight
backlight
backlight
backlight
Displaybeleuchtung
backlight
Doc. No. 12-5669-r01 (1/18/19)
Dok. Nr. 12-5669-r01 (18.01.2019)
Doc. No. 12-5669-r01 (1/18/19)
Doc. No. 12-5669-r01 (1/18/19)
- Quicklinks:
- Batterieaustausch
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
