Planung; Log - Oceanic PROPLUS 4.0 Bedienungshandbuch

PLANUNG (PLAN)
Diese Modus berechnet die Tauchtiefe und die Tauchgrenzen. Dabei berücksichtigt er eventuell verbleibenden Stickstoff, Sauerstoff, Oberflächenintervalle,
PLAN PLAN
das programmierte Gasgemisch und die PO2 Alarmeinstellung. Es werden entweder die Nullzeit (NO DECO) in Minuten oder O2 in Minuten
This mode calculates dive depth and time limits. To do so, it accounts for any residual nitrogen, oxygen, surface intervals, the programmed gas mix, This mode calculates dive depth and time limits. To do so, it accounts for any residual nitrogen, oxygen, surface intervals, the programmed gas mix,
PLAN PLAN
(verbleibende O2-Zeit) angezeigt, abhängig davon, ob die Stickstoff- oder die Sauerstofflevels als einschränkender Faktor gelten. Das Zeitlimit wird in
and PO2 alarm setting. Either NO DECO (No Decompression) min or O2 min (Oxygen Time Remaining) limits are displayed, depending on whether and PO2 alarm setting. Either NO DECO (No Decompression) min or O2 min (Oxygen Time Remaining) limits are displayed, depending on whether
This mode calculates dive depth and time limits. To do so, it accounts for any residual nitrogen, oxygen, surface intervals, the programmed gas mix, This mode calculates dive depth and time limits. To do so, it accounts for any residual nitrogen, oxygen, surface intervals, the programmed gas mix,
Minuten angezeigt.
nitrogen or oxygen levels will be the limiting factor. The time limit will display in minutes. nitrogen or oxygen levels will be the limiting factor. The time limit will display in minutes.
and PO2 alarm setting. Either NO DECO (No Decompression) min or O2 min (Oxygen Time Remaining) limits are displayed, depending on whether and PO2 alarm setting. Either NO DECO (No Decompression) min or O2 min (Oxygen Time Remaining) limits are displayed, depending on whether
nitrogen or oxygen levels will be the limiting factor. The time limit will display in minutes. nitrogen or oxygen levels will be the limiting factor. The time limit will display in minutes.
PLAN PLAN PLAN
This mode calculates dive depth and time limits. To do so, it accounts for any residual nitrogen, oxygen, surface intervals, the programmed gas mix, This mode calculates dive depth and time limits. To do so, it accounts for any residual nitrogen, oxygen, surface intervals, the programmed gas mix, This mode calculates dive depth and time limits. To do so, it accounts for any residual nitrogen, oxygen, surface intervals, the programmed gas mix,
HINWEIS: Die Tiefenstopp-Funktion funktioniert nur im Norm-Modus innerhalb der Nullzeiten.
NOTE: Depths exceeding the MOD (Maximum Operating Depth), if nitrox, or that have less than 1 minute allowed dive time will NOTE: Depths exceeding the MOD (Maximum Operating Depth), if nitrox, or that have less than 1 minute allowed dive time will
and PO2 alarm setting. Either NO DECO (No Decompression) min or O2 min (Oxygen Time Remaining) limits are displayed, depending on whether and PO2 alarm setting. Either NO DECO (No Decompression) min or O2 min (Oxygen Time Remaining) limits are displayed, depending on whether
and PO2 alarm setting. Either NO DECO (No Decompression) min or O2 min (Oxygen Time Remaining) limits are displayed, depending on whether
not be displayed. not be displayed.
NOTE: Depths exceeding the MOD (Maximum Operating Depth), if nitrox, or that have less than 1 minute allowed dive time will NOTE: Depths exceeding the MOD (Maximum Operating Depth), if nitrox, or that have less than 1 minute allowed dive time will
nitrogen or oxygen levels will be the limiting factor. The time limit will display in minutes. nitrogen or oxygen levels will be the limiting factor. The time limit will display in minutes. nitrogen or oxygen levels will be the limiting factor. The time limit will display in minutes.
not be displayed. not be displayed.
NOTE: Depths exceeding the MOD (Maximum Operating Depth), if nitrox, or that have less than 1 minute allowed dive time will NOTE: Depths exceeding the MOD (Maximum Operating Depth), if nitrox, or that have less than 1 minute allowed dive time will
NOTE: Depths exceeding the MOD (Maximum Operating Depth), if nitrox, or that have less than 1 minute allowed dive time will
not be displayed. not be displayed. not be displayed.
PLAN PLAN PLAN
Aktueller PO2
This mode calculates dive depth and time limits. To do so, it accounts for any residual nitrogen, oxygen, surface intervals, the programmed gas mix, This mode calculates dive depth and time limits. To do so, it accounts for any residual nitrogen, oxygen, surface intervals, the programmed gas mix, This mode calculates dive depth and time limits. To do so, it accounts for any residual nitrogen, oxygen, surface intervals, the programmed gas mix,
current PO current PO Alarm Alarm
2 2 Alarm-
and PO2 alarm setting. Either NO DECO (No Decompression) min or O2 min (Oxygen Time Remaining) limits are displayed, depending on whether and PO2 alarm setting. Either NO DECO (No Decompression) min or O2 min (Oxygen Time Remaining) limits are displayed, depending on whether and PO2 alarm setting. Either NO DECO (No Decompression) min or O2 min (Oxygen Time Remaining) limits are displayed, depending on whether
setpoint, blank if setpoint, blank if
current PO current PO Alarm Alarm
nitrogen or oxygen levels will be the limiting factor. The time limit will display in minutes. nitrogen or oxygen levels will be the limiting factor. The time limit will display in minutes. nitrogen or oxygen levels will be the limiting factor. The time limit will display in minutes.
Setpoint, leer wenn
2 2
FO2 is Air FO2 is Air
setpoint, blank if setpoint, blank if
FO2 Luft ist
FO2 is Air FO2 is Air
NOTE: Depths exceeding the MOD (Maximum Operating Depth), if nitrox, or that have less than 1 minute allowed dive time will NOTE: Depths exceeding the MOD (Maximum Operating Depth), if nitrox, or that have less than 1 minute allowed dive time will NOTE: Depths exceeding the MOD (Maximum Operating Depth), if nitrox, or that have less than 1 minute allowed dive time will
current PO current PO current PO Alarm Alarm Alarm
not be displayed. not be displayed. not be displayed.
2 2 2
setpoint, blank if setpoint, blank if
setpoint, blank if
FO2 is Air FO2 is Air FO2 is Air
next item in next item in
Nächstes
Main Menu Main Menu
next item in next item in
Element im
Main Menu Main Menu

LOG

LOG Hauptmenü
Pressing the SEL button while viewing the LOG Lead-in screen accesses the dive log. The log stores Information from the latest 24 Norm and/or Pressing the SEL button while viewing the LOG Lead-in screen accesses the dive log. The log stores Information from the latest 24 Norm and/or
LOG LOG
current PO current PO current PO Alarm Alarm
next item in next item in 2 next item in 2
Gauge mode dives for viewing. Gauge mode dives for viewing.
LOG setpoint, blank if setpoint, blank if setpoint, blank if
Pressing the SEL button while viewing the LOG Lead-in screen accesses the dive log. The log stores Information from the latest 24 Norm and/or Pressing the SEL button while viewing the LOG Lead-in screen accesses the dive log. The log stores Information from the latest 24 Norm and/or
Main Menu Main Menu
Main Menu
FO2 is Air FO2 is Air FO2 is Air
> If no dives are recorded, the message NONE YET #0 will be displayed in the log. > If no dives are recorded, the message NONE YET #0 will be displayed in the log.
Drücken von SEL auf dem LOG Einleitungsbildschirm öffnet den Tauch-Log. Log speichert die Daten von den letzten 24 Norm- und/oder Gauge-Modus
Gauge mode dives for viewing. Gauge mode dives for viewing.
> After exceeding 24 dives, the most recent dive is stored while the oldest is deleted. > After exceeding 24 dives, the most recent dive is stored while the oldest is deleted.
> If no dives are recorded, the message NONE YET #0 will be displayed in the log. Tauchgängen zum Anzeigen. > If no dives are recorded, the message NONE YET #0 will be displayed in the log.
LOG LOG LOG
> Dives are numbered from 1 to 24 starting each time a dive is activated in either Norm (or Gauge) mode. After the post dive 24 hour period has > Dives are numbered from 1 to 24 starting each time a dive is activated in either Norm (or Gauge) mode. After the post dive 24 hour period has
> Wenn keine Tauchgänge aufgezeichnet sind, wird auf dem Log #0 angezeigt.
> After exceeding 24 dives, the most recent dive is stored while the oldest is deleted. > After exceeding 24 dives, the most recent dive is stored while the oldest is deleted.
Pressing the SEL button while viewing the LOG Lead-in screen accesses the dive log. The log stores Information from the latest 24 Norm and/or Pressing the SEL button while viewing the LOG Lead-in screen accesses the dive log. The log stores Information from the latest 24 Norm and/or Pressing the SEL button while viewing the LOG Lead-in screen accesses the dive log. The log stores Information from the latest 24 Norm and/or
elapsed and the unit shuts off, the first dive of the next activation period will be recorded as dive #1. elapsed and the unit shuts off, the first dive of the next activation period will be recorded as dive #1.
> Dives are numbered from 1 to 24 starting each time a dive is activated in either Norm (or Gauge) mode. After the post dive 24 hour period has > Nach 24 Tauchgängen wird der neuste Tauchgang gespeichert und der älteste gelöscht. > Dives are numbered from 1 to 24 starting each time a dive is activated in either Norm (or Gauge) mode. After the post dive 24 hour period has
Gauge mode dives for viewing. Gauge mode dives for viewing.
Gauge mode dives for viewing.
> I n the event that dive time (min) exceeds 999 min, the data at the 999 interval is recorded in the Log upon surfacing of the unit. > I n the event that dive time (min) exceeds 999 min, the data at the 999 interval is recorded in the Log upon surfacing of the unit.
> Tauchgänge werden von 1 bis 24 nummeriert, jedes Mal wenn der Modus Norm (oder Gaug) aktiviert wird. Nachdem 24 Stunden nach dem letzten
elapsed and the unit shuts off, the first dive of the next activation period will be recorded as dive #1. elapsed and the unit shuts off, the first dive of the next activation period will be recorded as dive #1.
> If no dives are recorded, the message NONE YET #0 will be displayed in the log. > If no dives are recorded, the message NONE YET #0 will be displayed in the log. > If no dives are recorded, the message NONE YET #0 will be displayed in the log.
next item in next item in
> I n the event that dive time (min) exceeds 999 min, the data at the 999 interval is recorded in the Log upon surfacing of the unit. > I n the event that dive time (min) exceeds 999 min, the data at the 999 interval is recorded in the Log upon surfacing of the unit. Tauchgang verstrichen sind, schaltet sich die Einheit aus. Der erste Tauchgang der nächsten Aktivierungsperiode wird als Nummer 1 aufzeichnet.
> After exceeding 24 dives, the most recent dive is stored while the oldest is deleted. > After exceeding 24 dives, the most recent dive is stored while the oldest is deleted.
> After exceeding 24 dives, the most recent dive is stored while the oldest is deleted.
Main Menu Main Menu
> Wenn die Tauchzeit 999 Min. übersteigt, werden die Daten des 999 Intervalls nach dem Auftauchen im Log der Einheit gespeichert.
> Dives are numbered from 1 to 24 starting each time a dive is activated in either Norm (or Gauge) mode. After the post dive 24 hour period has > Dives are numbered from 1 to 24 starting each time a dive is activated in either Norm (or Gauge) mode. After the post dive 24 hour period has > Dives are numbered from 1 to 24 starting each time a dive is activated in either Norm (or Gauge) mode. After the post dive 24 hour period has
LOG LOG LOG
NOTE: New data will automatically overwrite the oldest data in memory when the memory becomes full. The ProPlus 4.0 Log NOTE: New data will automatically overwrite the oldest data in memory when the memory becomes full. The ProPlus 4.0 Log
elapsed and the unit shuts off, the first dive of the next activation period will be recorded as dive #1. elapsed and the unit shuts off, the first dive of the next activation period will be recorded as dive #1.
elapsed and the unit shuts off, the first dive of the next activation period will be recorded as dive #1.
Pressing the SEL button while viewing the LOG Lead-in screen accesses the dive log. The log stores Information from the latest 24 Norm and/or Pressing the SEL button while viewing the LOG Lead-in screen accesses the dive log. The log stores Information from the latest 24 Norm and/or Pressing the SEL button while viewing the LOG Lead-in screen accesses the dive log. The log stores Information from the latest 24 Norm and/or
and Diverlog + Download data is stored separately in different partitions of the memory. The Log only stores a short summary and Diverlog + Download data is stored separately in different partitions of the memory. The Log only stores a short summary
NOTE: New data will automatically overwrite the oldest data in memory when the memory becomes full. The ProPlus 4.0 Log NOTE: New data will automatically overwrite the oldest data in memory when the memory becomes full. The ProPlus 4.0 Log
> I n the event that dive time (min) exceeds 999 min, the data at the 999 interval is recorded in the Log upon surfacing of the unit. > I n the event that dive time (min) exceeds 999 min, the data at the 999 interval is recorded in the Log upon surfacing of the unit. > I n the event that dive time (min) exceeds 999 min, the data at the 999 interval is recorded in the Log upon surfacing of the unit.
Gauge mode dives for viewing. Gauge mode dives for viewing. Gauge mode dives for viewing.
HINWEIS: Neue Daten werden automatisch die ältesten überschreiben, wenn der Speicher voll ist. Die Log und Diverlog +
of each dive. Alternately, the Diverlog + Download function stores much larger files for each dive. For this reason, it is normal of each dive. Alternately, the Diverlog + Download function stores much larger files for each dive. For this reason, it is normal
and Diverlog + Download data is stored separately in different partitions of the memory. The Log only stores a short summary and Diverlog + Download data is stored separately in different partitions of the memory. The Log only stores a short summary
> If no dives are recorded, the message NONE YET #0 will be displayed in the log. > If no dives are recorded, the message NONE YET #0 will be displayed in the log. > If no dives are recorded, the message NONE YET #0 will be displayed in the log.
Download-Daten werden im ProPlus 4.0 in unterschiedlichen Partitionen des Speichers gespeichert. Log speichert nur
to see dives stored in the ProPlus 4.0's onboard Log that have already been overwritten in the Diverlog + Download Partition. If to see dives stored in the ProPlus 4.0's onboard Log that have already been overwritten in the Diverlog + Download Partition. If
> After exceeding 24 dives, the most recent dive is stored while the oldest is deleted. of each dive. Alternately, the Diverlog + Download function stores much larger files for each dive. For this reason, it is normal > After exceeding 24 dives, the most recent dive is stored while the oldest is deleted. of each dive. Alternately, the Diverlog + Download function stores much larger files for each dive. For this reason, it is normal > After exceeding 24 dives, the most recent dive is stored while the oldest is deleted.
eine kurze Übersicht jedes Tauchgangs. Alternativ dazu speichert die Funktion Diverlog + Download viel größere Dateien
> Dives are numbered from 1 to 24 starting each time a dive is activated in either Norm (or Gauge) mode. After the post dive 24 hour period has you do not remember to log or download your dives, they will be lost when the memory overwrites. See the Diverlog + Down- > Dives are numbered from 1 to 24 starting each time a dive is activated in either Norm (or Gauge) mode. After the post dive 24 hour period has you do not remember to log or download your dives, they will be lost when the memory overwrites. See the Diverlog + Down- > Dives are numbered from 1 to 24 starting each time a dive is activated in either Norm (or Gauge) mode. After the post dive 24 hour period has
to see dives stored in the ProPlus 4.0's onboard Log that have already been overwritten in the Diverlog + Download Partition. If to see dives stored in the ProPlus 4.0's onboard Log that have already been overwritten in the Diverlog + Download Partition. If
NOTE: New data will automatically overwrite the oldest data in memory when the memory becomes full. The ProPlus 4.0 Log NOTE: New data will automatically overwrite the oldest data in memory when the memory becomes full. The ProPlus 4.0 Log NOTE: New data will automatically overwrite the oldest data in memory when the memory becomes full. The ProPlus 4.0 Log
elapsed and the unit shuts off, the first dive of the next activation period will be recorded as dive #1. elapsed and the unit shuts off, the first dive of the next activation period will be recorded as dive #1. elapsed and the unit shuts off, the first dive of the next activation period will be recorded as dive #1.
pro Tauchgang. Aus diesem Grund können Tauchgänge im integrierten Log des ProPlus 4.0 gesehen werden, die in der
load section of this manual for instructions on downloading dives. load section of this manual for instructions on downloading dives.
you do not remember to log or download your dives, they will be lost when the memory overwrites. See the Diverlog + Down- you do not remember to log or download your dives, they will be lost when the memory overwrites. See the Diverlog + Down-
and Diverlog + Download data is stored separately in different partitions of the memory. The Log only stores a short summary and Diverlog + Download data is stored separately in different partitions of the memory. The Log only stores a short summary
and Diverlog + Download data is stored separately in different partitions of the memory. The Log only stores a short summary
> I n the event that dive time (min) exceeds 999 min, the data at the 999 interval is recorded in the Log upon surfacing of the unit. > I n the event that dive time (min) exceeds 999 min, the data at the 999 interval is recorded in the Log upon surfacing of the unit. > I n the event that dive time (min) exceeds 999 min, the data at the 999 interval is recorded in the Log upon surfacing of the unit.
Partition Diverlog + Download bereits überschrieben worden sind. Wenn Sie vergessen, Ihre Tauchgänge zu protokollieren
load section of this manual for instructions on downloading dives. load section of this manual for instructions on downloading dives.
of each dive. Alternately, the Diverlog + Download function stores much larger files for each dive. For this reason, it is normal of each dive. Alternately, the Diverlog + Download function stores much larger files for each dive. For this reason, it is normal of each dive. Alternately, the Diverlog + Download function stores much larger files for each dive. For this reason, it is normal
Log Lead-in Log Lead-in
oder herunterzuladen, gehen sie verloren, wenn der Speicher überschrieben wird. Zum Herunterladen von Tauchgängen
to see dives stored in the ProPlus 4.0's onboard Log that have already been overwritten in the Diverlog + Download Partition. If to see dives stored in the ProPlus 4.0's onboard Log that have already been overwritten in the Diverlog + Download Partition. If
to see dives stored in the ProPlus 4.0's onboard Log that have already been overwritten in the Diverlog + Download Partition. If
Log Lead-in Log Lead-in
siehe Abschnitt Diverlog + Download dieses Handbuchs.
NOTE: New data will automatically overwrite the oldest data in memory when the memory becomes full. The ProPlus 4.0 Log NOTE: New data will automatically overwrite the oldest data in memory when the memory becomes full. The ProPlus 4.0 Log NOTE: New data will automatically overwrite the oldest data in memory when the memory becomes full. The ProPlus 4.0 Log
you do not remember to log or download your dives, they will be lost when the memory overwrites. See the Diverlog + Down- you do not remember to log or download your dives, they will be lost when the memory overwrites. See the Diverlog + Down- you do not remember to log or download your dives, they will be lost when the memory overwrites. See the Diverlog + Down-
and Diverlog + Download data is stored separately in different partitions of the memory. The Log only stores a short summary and Diverlog + Download data is stored separately in different partitions of the memory. The Log only stores a short summary and Diverlog + Download data is stored separately in different partitions of the memory. The Log only stores a short summary
load section of this manual for instructions on downloading dives. load section of this manual for instructions on downloading dives.
load section of this manual for instructions on downloading dives.
of each dive. Alternately, the Diverlog + Download function stores much larger files for each dive. For this reason, it is normal of each dive. Alternately, the Diverlog + Download function stores much larger files for each dive. For this reason, it is normal of each dive. Alternately, the Diverlog + Download function stores much larger files for each dive. For this reason, it is normal
Log Einleitung
Log Lead-in Log Lead-in Log Lead-in
to see dives stored in the ProPlus 4.0's onboard Log that have already been overwritten in the Diverlog + Download Partition. If to see dives stored in the ProPlus 4.0's onboard Log that have already been overwritten in the Diverlog + Download Partition. If to see dives stored in the ProPlus 4.0's onboard Log that have already been overwritten in the Diverlog + Download Partition. If
you do not remember to log or download your dives, they will be lost when the memory overwrites. See the Diverlog + Down- you do not remember to log or download your dives, they will be lost when the memory overwrites. See the Diverlog + Down- you do not remember to log or download your dives, they will be lost when the memory overwrites. See the Diverlog + Down-
load section of this manual for instructions on downloading dives. load section of this manual for instructions on downloading dives. load section of this manual for instructions on downloading dives.
Log Lead-in Log Lead-in Log Lead-in
ADV ADV SEL SEL
ADV ADV SEL SEL
next item in next item in
Main Menu Main Menu
next item in next item in
Main Menu Main Menu
ADV ADV ADV SEL SEL SEL
ADV ADV SEL ADV
Nächstes
next item in next item in next item in
next item in next item in next item in
Element im
Main Menu Main Menu
Main Menu
Main Menu Main Menu Main Menu
Hauptmenü
© Pelagic, 2019
© Pelagic, 2019 © Pelagic, 2019
MOD MOD MOD
MOD MOD
% O2,
% O % O
aktueller
current current
% O % O
MOD MOD
MOD
FO
FO FO
current current
2
FO FO
2
% O % O , ,
% O
2 2
current current current
FO FO setpoint setpoint
FO
2 2
2
ADV ADV SEL SEL
ADV ADV SEL SEL
access access
MOD MOD
planner planner
access Zugriff access
planner Planer planner
% O % O , ,
ADV ADV ADV SEL SEL SEL
2 2
current current
Alarm
access access
access
FO FO setpoint setpoint
2
2 2
planner planner planner
ADV ADV SEL ADV SEL SEL
access access access
next item in
planner planner planner
Main Menu
Log Preview
Log Preview
Log Preview Log Vorschau Log Preview Log Preview
dive # dive # Log Preview Log Preview
dive # dive #
Tauchgang #
dive # dive # dive #
dive # dive # dive # ADV
ADV
access access
next dive next dive
log log
access access
recorded recorded
next dive next dive
log log
recorded recorded
ADV ADV ADV
ADV ADV
SEL SEL
nächster
access access access
next dive next dive next dive
Zugriff
access access access
aufgezeichnete
next dive next dive next dive
log log
log
recorded recorded
recorded
auf
log log log
recorded Tauchgang recorded recorded
Log
, ,
2 2
, ,
2 2
Setpoint
setpoint setpoint
2
2
setpoint setpoint
2
,
2
setpoint
MOD
% O ,
2
current
FO setpoint
2
to increase to increase
depth depth
Log Preview
Log Preview
time dive time dive
started started
time dive time dive
started started
NOR (Norm), NOR (Norm),
Startzeit
time dive time dive
time dive
GAU (Gauge), or GAU (Gauge), or
NOR (Norm), NOR (Norm),
Log Preview
Tauchgang
started started started
VIO (Violation) VIO (Violation)
GAU (Gauge), or GAU (Gauge), or
time dive time dive time dive
VIO (Violation) VIO (Violation)
started started NOR (Norm), started
NOR (Norm), NOR (Norm),
NOR (Norm),
date of dive date of dive
GAU (Gauge) oder
GAU (Gauge), or GAU (Gauge), or GAU (Gauge), or
date of dive date of dive
VIO (Verstoß)
NOR (Norm), NOR (Norm), VIO (Violation) VIO (Violation) VIO (Violation) NOR (Norm),
GAU (Gauge), or GAU (Gauge), or GAU (Gauge), or
ADV SEL SEL
VIO (Violation) VIO (Violation) VIO (Violation)
ADV SEL SEL Datum des
date of dive date of dive date of dive
view dive view dive
Tauchgangs
record record
view dive view dive
date of dive date of dive date of dive
record record
SEL SEL SEL
SEL ADV SEL SEL
view dive view dive view dive
Tauchgangaufzeichnung
view dive view dive view dive
record record
record
anzeigen
record record record
18
18 18
PROPLUS 4.0 BEDIENUNGSHANDBUCH
PROPLUS 4.0 OPERATING MANUAL PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL PROPLUS 4.0 OPERATING MANUAL PROPLUS 4.0 OPERATING MANUAL
ADV ADV SEL SEL
ADV ADV SEL SEL
to increase to increase
zum Steigern
depth depth
to increase to increase
der
depth depth
Tiefe
ADV ADV ADV SEL SEL SEL
or O2 MIN or O2 MIN
to increase to increase to increase
depth depth
depth
ADV ADV SEL ADV SEL SEL
exit to exit to exit to
to increase
Main Menu Main Menu Main Menu
depth
Log Data1 Log Data1
Log Data1 Log Data1
pre dive Surface Interval
hr:min, - : - - if first dive during
pre dive Surface Interval
the activation period
hr:min, - : - - if first dive during
Log Data1
Log Data1 Log Data1 Log Data1
Vor Tauchgang
the activation period
Oberflächenintervall
pre dive Surface Interval pre dive Surface Interval pre dive Surface Interval
lowest
Std:Min, - : - - wenn der erste
hr:min, - : - - if first dive during hr:min, - : - - if first dive during
hr:min, - : - - if first dive during
temperature
Log Data1 Log Data1 Log Data1
lowest
Tauchgang innerhalb
the activation period the activation period the activation period
temperature
pre dive Surface Interval pre dive Surface Interval pre dive Surface Interval
der Aktivierungsperiode liegt
recorded elevation of
hr:min, - : - - if first dive during hr:min, - : - - if first dive during hr:min, - : - - if first dive during
dive location,
recorded elevation of
the activation period the activation period the activation period tiefste
lowest lowest
lowest
SEA (or EL 2 - EL7)
Temperatur dive location,
temperature temperature temperature
SEA (or EL 2 - EL7)
lowest lowest lowest
temperature temperature temperature aufgezeichnete Höhe des
recorded elevation of recorded elevation of recorded elevation of
ADV ADV SEL SEL
Tauchgangstandorts,
dive location, dive location,
dive location,
ADV ADV SEL SEL
to
recorded elevation of recorded elevation of recorded elevation of
SEA (oder EL2 - EL7)
SEA (or EL 2 - EL7) SEA (or EL 2 - EL7) SEA (or EL 2 - EL7)
dive location, dive location, dive location, Data 2
to
SEA (or EL 2 - EL7) SEA (or EL 2 - EL7) SEA (or EL 2 - EL7)
Data 2
ADV ADV ADV SEL SEL SEL
ADV ADV SEL ADV SEL SEL
to to to
zu
to to to
Data 2 Data 2
Data 2
Data 2
Data 2 Data 2 Data 2
oder O MIN
or O2 MIN or O2 MIN
2
or O2 MIN or O2 MIN
or O2 MIN or O2 MIN
or O2 MIN
exit to exit to
verlassen
Main Menu Main Menu
exit to exit to
zurück zum
Main Menu Main Menu
Hauptmenü
or O2 MIN
exit to exit to
exit to
Main Menu Main Menu Main Menu
pre dive Surface Interval
hr:min, - : - - if first dive during
pre dive Surface Interval
the activation period
hr:min, - : - - if first dive during
the activation period
lowest
temperature
lowest
temperature
recorded elevation of
dive location,
recorded elevation of
SEA (or EL 2 - EL7)
dive location,
SEA (or EL 2 - EL7)
to
Data 2
to
Data 2
Dok. Nr. 12-5669-r01 (18.01.2019)
Doc. No. 12-5669-r01 (1/18/19) Doc. No. 12-5669-r01 (1/18/19)