Gas Einstellen - Oceanic PROPLUS 4.0 Bedienungshandbuch

TLBG mit blinkendem Segment
TLBG* with the max
TLBG* with the max
der maximal angesammelten
TLBG* with the max accumulation segment TLBG* with the max
accumulation segment
Sättigung, die anderen
accumulation segment accumulation segment
flashing, others fixed up to
flashing, others fixed up to
bleiben bis zum Ende der
flashing, others fixed up to flashing, others fixed up to end of dive accumulation.
end of dive accumulation.
Sättigung solid.
end of dive accumulation. end of dive accumulation.
All segments flashing if a
All segments flashing if a
Bei verzögertem Verstoß
All segments flashing if a Delayed Violation. No TLBG All segments flashing if a
Delayed Violation. No TLBG
TLBG* with the max blinken alle Segmente. Kein TLBG* with the max TLBG* with the max
Delayed Violation. No TLBG Delayed Violation. No TLBG
if Gauge Mode.
if Gauge Mode.
TLBG* with the max TLBG* with the max
TLBG im Gauge-Modus.
accumulation segment accumulation segment accumulation segment
if Gauge Mode. if Gauge Mode.
accumulation segment accumulation segment
flashing, others fixed up to flashing, others fixed up to flashing, others fixed up to
flashing, others fixed up to flashing, others fixed up to
end of dive accumulation. end of dive accumulation. end of dive accumulation.
end of dive accumulation. end of dive accumulation.
All segments flashing if a All segments flashing if a All segments flashing if a
All segments flashing if a All segments flashing if a
Delayed Violation. No TLBG Delayed Violation. No TLBG Delayed Violation. No TLBG
*TLBG = Tissue Loading
*TLBG = Tissue Loading
Delayed Violation. No TLBG Delayed Violation. No TLBG
if Gauge Mode. if Gauge Mode. if Gauge Mode.
*TLBG = Tissue Loading *TLBG = Tissue Loading Bar Graph
Bar Graph
Gewebesättigungs-
if Gauge Mode. if Gauge Mode.
Bar Graph Bar Graph
Balkendiagramm
*TLBG = Tissue Loading *TLBG = Tissue Loading *TLBG = Tissue Loading
*TLBG = Tissue Loading *TLBG = Tissue Loading
Bar Graph Bar Graph Bar Graph
Bar Graph Bar Graph
SET GAS
SET GAS
SET GAS SET GAS Pressing the SEL button while viewing the Set Gas Lead-in screen accesses the Set FO
Pressing the SEL button while viewing the Set Gas Lead-in screen accesses the Set FO
GAS EINSTELLEN (SET GAS)
Pressing the SEL button while viewing the Set Gas Lead-in screen accesses the Set FO Pressing the SEL button while viewing the Set Gas Lead-in screen accesses the Set FO
Air to any nitrox mix between 21 - 100 FO
Air to any nitrox mix between 21 - 100 FO
Drücken von SEL auf dem Set Gas-Einleitungsbildschirm öffnet den Set FO2 Bildschirm. Hier können Sie das Gasgemisch von Luft auf jedes Nitroxgemisch
Air to any nitrox mix between 21 - 100 FO Air to any nitrox mix between 21 - 100 FO current PO Alarm setting. If you do not like the current PO
current PO Alarm setting. If you do not like the current PO
von 21 - 100 FO2 (% O2) ändern. Nitroxgemische werden hier mit der entsprechenden MOD (maximale Einsatztiefe) und der aktuellen PO2-
2
2
current PO current PO Alarm setting. If you do not like the current PO Alarm setting. If you do not like the current PO
setting.
Alarmeinstellung angezeigt. Wenn Sie die aktuelle PO2-Alarmeinstellung ändern wollen, können Sie das im Bildschirm, der nach dem Speichern eines
setting.
2 2
setting. setting.
SET GAS SET GAS Nitroxgasgemisch-Einstellung angezeigt wird. SET GAS
SET GAS SET GAS
Pressing the SEL button while viewing the Set Gas Lead-in screen accesses the Set FO Pressing the SEL button while viewing the Set Gas Lead-in screen accesses the Set FO Pressing the SEL button while viewing the Set Gas Lead-in screen accesses the Set FO
NOTE: Once a nitrox dive is made, the Air option will not be displayed in the Set Gas menu until 24 hours elapse after the last
Pressing the SEL button while viewing the Set Gas Lead-in screen accesses the Set FO Pressing the SEL button while viewing the Set Gas Lead-in screen accesses the Set FO
NOTE: Once a nitrox dive is made, the Air option will not be displayed in the Set Gas menu until 24 hours elapse after the last
Air to any nitrox mix between 21 - 100 FO Air to any nitrox mix between 21 - 100 FO Air to any nitrox mix between 21 - 100 FO
NOTE: Once a nitrox dive is made, the Air option will not be displayed in the Set Gas menu until 24 hours elapse after the last HINWEIS: Die Option Luft wird während 24 Stunden nach dem letzten Nitrox-Tauchgang nicht als Einstellung im Set Gas Menü NOTE: Once a nitrox dive is made, the Air option will not be displayed in the Set Gas menu until 24 hours elapse after the last
dive. If subsequent Air dives are made during this period, an FO2 value of 21 should be chosen.
Air to any nitrox mix between 21 - 100 FO Air to any nitrox mix between 21 - 100 FO
current PO current PO dive. If subsequent Air dives are made during this period, an FO2 value of 21 should be chosen. current PO Alarm setting. If you do not like the current PO Alarm setting. If you do not like the current PO Alarm setting. If you do not like the current PO
2 2 2
angezeigt. Wenn ein Lufttauchgang durchgeführt wird, muss ein FO2-Wert von 21 ausgewählt werden.
dive. If subsequent Air dives are made during this period, an FO2 value of 21 should be chosen. dive. If subsequent Air dives are made during this period, an FO2 value of 21 should be chosen.
current PO current PO Alarm setting. If you do not like the current PO Alarm setting. If you do not like the current PO
setting. setting. setting.
2 2
NOTE: When FO2 is set for AIR, oxygen related data (such as PO2, % O2) will not be displayed at any time during the dive, on
NOTE: When FO2 is set for AIR, oxygen related data (such as PO2, % O2) will not be displayed at any time during the dive, on
setting. setting.
NOTE: When FO2 is set for AIR, oxygen related data (such as PO2, % O2) will not be displayed at any time during the dive, on NOTE: When FO2 is set for AIR, oxygen related data (such as PO2, % O2) will not be displayed at any time during the dive, on the surface, or in Plan Mode. Though these oxygen values will be tracked internally for use in any subsequent nitrox dives.
the surface, or in Plan Mode. Though these oxygen values will be tracked internally for use in any subsequent nitrox dives.
HINWEIS: Wenn FO2 für Luft eingerichtet wird, werden die Daten, die sich auf den Sauerstoff beziehen (wie PO2, %
the surface, or in Plan Mode. Though these oxygen values will be tracked internally for use in any subsequent nitrox dives. the surface, or in Plan Mode. Though these oxygen values will be tracked internally for use in any subsequent nitrox dives.
NOTE: Once a nitrox dive is made, the Air option will not be displayed in the Set Gas menu until 24 hours elapse after the last NOTE: Once a nitrox dive is made, the Air option will not be displayed in the Set Gas menu until 24 hours elapse after the last NOTE: Once a nitrox dive is made, the Air option will not be displayed in the Set Gas menu until 24 hours elapse after the last
O2) zu keinem Zeitpunkt angezeigt, weder während des Tauchgangs, an der Oberfläche noch im Planmodus. Diese
NOTE: Gas 1 cannot be set to OFF.
NOTE: Gas 1 cannot be set to OFF.
NOTE: Once a nitrox dive is made, the Air option will not be displayed in the Set Gas menu until 24 hours elapse after the last NOTE: Once a nitrox dive is made, the Air option will not be displayed in the Set Gas menu until 24 hours elapse after the last
dive. If subsequent Air dives are made during this period, an FO2 value of 21 should be chosen. dive. If subsequent Air dives are made during this period, an FO2 value of 21 should be chosen. dive. If subsequent Air dives are made during this period, an FO2 value of 21 should be chosen.
NOTE: Gas 1 cannot be set to OFF. Sauerstoffwerte werden jedoch intern im Hintergrund verfogt und für mögliche nachfolgende Nitrox-Tauchgänge NOTE: Gas 1 cannot be set to OFF.
dive. If subsequent Air dives are made during this period, an FO2 value of 21 should be chosen. dive. If subsequent Air dives are made during this period, an FO2 value of 21 should be chosen.
FO2 Default verwendet.
FO2 Default
NOTE: When FO2 is set for AIR, oxygen related data (such as PO2, % O2) will not be displayed at any time during the dive, on NOTE: When FO2 is set for AIR, oxygen related data (such as PO2, % O2) will not be displayed at any time during the dive, on NOTE: When FO2 is set for AIR, oxygen related data (such as PO2, % O2) will not be displayed at any time during the dive, on
FO2 Default FO2 Default The FO2 Default setting follows Set FO2 and PO2 for gases 1-3. When the FO2 50% Default is set On and FO2 is set for a numerical value, 10 min-
The FO2 Default setting follows Set FO2 and PO2 for gases 1-3. When the FO2 50% Default is set On and FO2 is set for a numerical value, 10 min-
NOTE: When FO2 is set for AIR, oxygen related data (such as PO2, % O2) will not be displayed at any time during the dive, on NOTE: When FO2 is set for AIR, oxygen related data (such as PO2, % O2) will not be displayed at any time during the dive, on
the surface, or in Plan Mode. Though these oxygen values will be tracked internally for use in any subsequent nitrox dives. the surface, or in Plan Mode. Though these oxygen values will be tracked internally for use in any subsequent nitrox dives. the surface, or in Plan Mode. Though these oxygen values will be tracked internally for use in any subsequent nitrox dives.
The FO2 Default setting follows Set FO2 and PO2 for gases 1-3. When the FO2 50% Default is set On and FO2 is set for a numerical value, 10 min- The FO2 Default setting follows Set FO2 and PO2 for gases 1-3. When the FO2 50% Default is set On and FO2 is set for a numerical value, 10 min-
utes on the surface after that dive the FO2 will be displayed as 50 and further dives will be calculated based on 50% O2 for oxygen calculations
utes on the surface after that dive the FO2 will be displayed as 50 and further dives will be calculated based on 50% O2 for oxygen calculations
the surface, or in Plan Mode. Though these oxygen values will be tracked internally for use in any subsequent nitrox dives. the surface, or in Plan Mode. Though these oxygen values will be tracked internally for use in any subsequent nitrox dives.
HINWEIS: Gas 1 kann nicht deaktiviert werden.
utes on the surface after that dive the FO2 will be displayed as 50 and further dives will be calculated based on 50% O2 for oxygen calculations and 21% O2 for Nitrogen calculations (79% Nitrogen), unless FO2 is set before the dive. utes on the surface after that dive the FO2 will be displayed as 50 and further dives will be calculated based on 50% O2 for oxygen calculations
and 21% O2 for Nitrogen calculations (79% Nitrogen), unless FO2 is set before the dive.
NOTE: Gas 1 cannot be set to OFF. NOTE: Gas 1 cannot be set to OFF. NOTE: Gas 1 cannot be set to OFF.
and 21% O2 for Nitrogen calculations (79% Nitrogen), unless FO2 is set before the dive. and 21% O2 for Nitrogen calculations (79% Nitrogen), unless FO2 is set before the dive.
NOTE: Gas 1 cannot be set to OFF. NOTE: Gas 1 cannot be set to OFF.
FO2 Standard
FO2 will continue to reset to the FO2 50% Default after subsequent repetitive dives until 24 hours elapse after the last dive, or the
FO2 will continue to reset to the FO2 50% Default after subsequent repetitive dives until 24 hours elapse after the last dive, or the
FO2 Default FO2 Default FO2 Default
Die FO2 Standardeinstellung folgt nach Set FO2 und PO2 für die Gase 1 - 3. Wenn FO2 50 % Standard eingeschaltet ist und für FO2 ein nummerischer
FO2 will continue to reset to the FO2 50% Default after subsequent repetitive dives until 24 hours elapse after the last dive, or the FO2 will continue to reset to the FO2 50% Default after subsequent repetitive dives until 24 hours elapse after the last dive, or the
FO2 50% Default is set Off.
FO2 50% Default is set Off.
FO2 Default FO2 Default
The FO2 Default setting follows Set FO2 and PO2 for gases 1-3. When the FO2 50% Default is set On and FO2 is set for a numerical value, 10 min- The FO2 Default setting follows Set FO2 and PO2 for gases 1-3. When the FO2 50% Default is set On and FO2 is set for a numerical value, 10 min- The FO2 Default setting follows Set FO2 and PO2 for gases 1-3. When the FO2 50% Default is set On and FO2 is set for a numerical value, 10 min-
Wert eingegeben wurde, wird 10 Minuten nach dem Auftauchen der Wert FO2 als 50 angezeigt. Für weitere Wiederholungstauchgänge wird von 50 %
FO2 50% Default is set Off. FO2 50% Default is set Off.
The FO2 Default setting follows Set FO2 and PO2 for gases 1-3. When the FO2 50% Default is set On and FO2 is set for a numerical value, 10 min- The FO2 Default setting follows Set FO2 and PO2 for gases 1-3. When the FO2 50% Default is set On and FO2 is set for a numerical value, 10 min-
utes on the surface after that dive the FO2 will be displayed as 50 and further dives will be calculated based on 50% O2 for oxygen calculations utes on the surface after that dive the FO2 will be displayed as 50 and further dives will be calculated based on 50% O2 for oxygen calculations utes on the surface after that dive the FO2 will be displayed as 50 and further dives will be calculated based on 50% O2 for oxygen calculations Set Gas Lead-in
Set Gas Lead-in
O2 für die Sauerstoffberechnungen und 21 % O2 für die Stickstoffberechnungen (79 % Stickstoff) ausgegangen, es sei denn, für FO2 wird vor dem
utes on the surface after that dive the FO2 will be displayed as 50 and further dives will be calculated based on 50% O2 for oxygen calculations utes on the surface after that dive the FO2 will be displayed as 50 and further dives will be calculated based on 50% O2 for oxygen calculations
and 21% O2 for Nitrogen calculations (79% Nitrogen), unless FO2 is set before the dive. and 21% O2 for Nitrogen calculations (79% Nitrogen), unless FO2 is set before the dive. Set Gas Lead-in and 21% O2 for Nitrogen calculations (79% Nitrogen), unless FO2 is set before the dive. Set Gas Lead-in
Tauchgang ein neuer nummerischer Wert eingegeben.
and 21% O2 for Nitrogen calculations (79% Nitrogen), unless FO2 is set before the dive. and 21% O2 for Nitrogen calculations (79% Nitrogen), unless FO2 is set before the dive.
FO2 wird nach aufeinanderfolgenden Tauchgängen weiterhin auf FO2 50 % Standard zurückgesetzt, bis 24 Stunden nach dem letzten Tauchgang
FO2 will continue to reset to the FO2 50% Default after subsequent repetitive dives until 24 hours elapse after the last dive, or the FO2 will continue to reset to the FO2 50% Default after subsequent repetitive dives until 24 hours elapse after the last dive, or the FO2 will continue to reset to the FO2 50% Default after subsequent repetitive dives until 24 hours elapse after the last dive, or the
verstrichen sind oder der Wert FO2 50 % Standard ausgeschaltet wird.
FO2 will continue to reset to the FO2 50% Default after subsequent repetitive dives until 24 hours elapse after the last dive, or the FO2 will continue to reset to the FO2 50% Default after subsequent repetitive dives until 24 hours elapse after the last dive, or the
FO2 50% Default is set Off. FO2 50% Default is set Off. FO2 50% Default is set Off.
FO2 50% Default is set Off. FO2 50% Default is set Off.
Einstellen Gas Einleitung
Set Gas Lead-in Set Gas Lead-in Set Gas Lead-in
Set Gas Lead-in Set Gas Lead-in
ADV SEL
ADV SEL
ADV ADV SEL SEL
to Set
to Set
Gas 1 FO
Gas 1 FO
ADV ADV ADV SEL SEL SEL
ADV ADV SEL SEL
to Set to Set
NOTE: Set Gas 2/3 FO
NOTE: Set Gas 2/3 FO
Zu
to Set 2
Gas 1 FO Gas 1 FO
NOTE: Set Gas 2/3 FO NOTE: Set Gas 2/3 FO
Einstellen
Gas 1 FO
Gas 1 FO
NOTE: Set Gas 2/3 FO HINWEIS: Einstellen von Gas 2/3 und PO2 ist ähnlich wie das Einstellen von Gas 1. NOTE: Set Gas 2/3 FO NOTE: Set Gas 2/3 FO
NOTE: Set Gas 2/3 FO NOTE: Set Gas 2/3 FO
© Pelagic, 2019
Log Data 2
Log Data 2
Log Data 2
Log Data 2 Log Data 2
max depth
max depth
max ascent
rate
Log Data 2 Log Data 2 Log Data 2
Log Data 2 Log Data 2
max depth
max ascent
elapsed dive time rate
elapsed dive time
ADV SEL
ADV SEL
*TLBG =
ADV ADV SEL SEL
to
elapsed dive time
to
Data 3
Data 3
ADV ADV ADV SEL SEL SEL
ADV ADV SEL SEL
to to
to
Data 3 Data 3
Data 3
(% O ). Nitrox mixes are displayed with their corresponding MOD (Maximum Operating Depth) and the
(% O ). Nitrox mixes are displayed with their corresponding MOD (Maximum Operating Depth) and the
2 2
2 2
(% O ). Nitrox mixes are displayed with their corresponding MOD (Maximum Operating Depth) and the (% O ). Nitrox mixes are displayed with their corresponding MOD (Maximum Operating Depth) and the
Alarm setting, it can be changed in the screen that follows after saving a nitrox gas mix
2 2 2 2
2
(% O (% O ). Nitrox mixes are displayed with their corresponding MOD (Maximum Operating Depth) and the (% O ). Nitrox mixes are displayed with their corresponding MOD (Maximum Operating Depth) and the ). Nitrox mixes are displayed with their corresponding MOD (Maximum Operating Depth) and the
2 2 2 2 2 2
(% O (% O ). Nitrox mixes are displayed with their corresponding MOD (Maximum Operating Depth) and the ). Nitrox mixes are displayed with their corresponding MOD (Maximum Operating Depth) and the
2 2 2 2
2
Set Gas 1 FO
Set Gas 1 FO
Set Gas 1 FO
Einstellen Gas 1 FO
current
current
current current
PO2 Alarm
PO2 Alarm
PO2 Alarm PO2 Alarm setting
setting
setting setting
current current current
aktuelle
ADV
current current
PO2 Alarm PO2 Alarm PO2 Alarm
PO Alarm-
ADV
PO2 Alarm 2 PO2 Alarm
to Set
setting setting setting
Einstellung adjust FO2
adjust FO2
setting setting
to Set Gas 1 FO
adjust FO2 setting adjust FO2
setting
2
2
Gas 1 FO
setting setting
2 2
ADV
to Set
and PO are similar to Set Gas 1.
and PO are similar to Set Gas 1.
adjust FO2 adjust FO2 adjust FO2
EINSTELLEN
2 2
to Set 2
Gas 1 FO
and PO and PO are similar to Set Gas 1. are similar to Set Gas 1.
adjust FO2 adjust FO2
setting setting setting
2 2 2 FO -
2 2 2 2
Gas 1 FO
setting 2 setting
2 2
Einstellung
2
and PO and PO and PO are similar to Set Gas 1. are similar to Set Gas 1. are similar to Set Gas 1.
2 2 2 2 2 2
and PO and PO are similar to Set Gas 1. are similar to Set Gas 1.
2 2 2 2
Maximaltiefe
max depth
max depth
maximale Aufstiegs-
max ascent
max ascent geschwindigkeit. max ascent
rate
rate rate
max depth max depth
max depth max depth
TLBG* with the max
max ascent max ascent
Verstrichene elapsed dive time
max ascent max ascent
accumulation segment
rate rate
elapsed dive time
Tauchzeit
rate rate
flashing, others fixed up to
end of dive accumulation.
All segments flashing if a
Delayed Violation. No TLBG
to
if Gauge Mode.
elapsed dive time elapsed dive time
bei to Data 3
elapsed dive time elapsed dive time
Data 3
Data 3
*TLBG = Tissue Loading
to
Bar Graph
to
Data 3
Data 3
screen. Within this screen you can change the gas mix from
2
screen. Within this screen you can change the gas mix from
2
Alarm setting, it can be changed in the screen that follows after saving a nitrox gas mix
2
Alarm setting, it can be changed in the screen that follows after saving a nitrox gas mix Alarm setting, it can be changed in the screen that follows after saving a nitrox gas mix
2 2
SET GAS
screen. Within this screen you can change the gas mix from screen. Within this screen you can change the gas mix from
2 2
Pressing the SEL button while viewing the Set Gas Lead-in screen accesses the Set FO screen. Within this screen you can change the gas mix from
2
Air to any nitrox mix between 21 - 100 FO
Alarm setting, it can be changed in the screen that follows after saving a nitrox gas mix Alarm setting, it can be changed in the screen that follows after saving a nitrox gas mix Alarm setting, it can be changed in the screen that follows after saving a nitrox gas mix
2 2
current PO Alarm setting, it can be changed in the screen that follows after saving a nitrox gas mix Alarm setting, it can be changed in the screen that follows after saving a nitrox gas mix Alarm setting. If you do not like the current PO
2 2 2
setting.
NOTE: Once a nitrox dive is made, the Air option will not be displayed in the Set Gas me
dive. If subsequent Air dives are made during this period, an FO2 value of 21 should be
NOTE: When FO2 is set for AIR, oxygen related data (such as PO2, % O2) will not be disp
the surface, or in Plan Mode. Though these oxygen values will be tracked internally for u
NOTE: Gas 1 cannot be set to OFF.
FO2 Default
The FO2 Default setting follows Set FO2 and PO2 for gases 1-3. When the FO2 50% Default is set On a
Set Gas 1 FO
2
utes on the surface after that dive the FO2 will be displayed as 50 and further dives will be calculated b 2
Set Gas 1 FO
2 2
and 21% O2 for Nitrogen calculations (79% Nitrogen), unless FO2 is set before the dive.
MOD
MOD
MOD MOD
FO2 will continue to reset to the FO2 50% Default after subsequent repetitive dives until 24 hours elapse
FO2 50% Default is set Off.
Set Gas 1 FO Set Gas 1 FO
2 2 2 2
Set Gas 1 FO Set Gas Lead-in Set Gas 1 FO
2 2 FO2 (O2%)
FO2 (O2%)
FO2 (O2%) setting FO2 (O2%)
MOD MOD MOD MOD
setting
setting MOD MOD setting
FO2 (O2%) FO2 (O2%) FO2 (O2%)
FO (O %)
FO2 (O2%) 2 FO2 (O2%) 2
ADV setting SEL setting setting
SEL
Einstellung
setting setting
ADV SEL SEL
save
save
save save setting
setting
setting setting
ADV ADV SEL SEL SEL
ADV ADV SEL SEL
ADV SEL
save save save
save to Set save
setting Einstellung setting setting
setting Gas 1 FO setting
speichern
NOTE: Set Gas 2/3 FO
2
19
PROPLUS 4.0 BEDIENUNGSHANDBUCH
PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL PROPLUS 4.0 OPERATING MANUAL
Log Data 3
Log Data 3
Log Data 3
PROPLUS 4.0 OPERATING MANUAL PROPLUS 4.0 OPERATING MANUAL PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL PROPLUS 4.0 OPERATING MANUAL
gas #
gas #
Log Data 3 Log Data 3 Log Data 3
Gas #
gas # gas #
Log Data 2 Log Data 3 Log Data 3
highest
höchste highest
max depth
highest highest
PO2
während des
PO2
PO2 reached PO2
Tauchgangs reached
max ascent
reached reached during
erreichte
during
gas # gas # gas #
rate
during during
the dive
PO the dive
gas # gas #
2
the dive the dive
highest highest highest
ADV SEL
highest highest
PO2 PO2 PO2
ADV
PO2 PO2
reached reached reached
reached reached
during during during
elapsed dive time
during during
the dive the dive the dive
the dive the dive
ADV ADV ADV
NOTE: Log Data 3 only displays for nitrox
NOTE: Log Data 3 only displays for nitrox
ADV ADV
ADV SEL
NOTE: Log Data 3 only displays for nitrox dives; it is bypassed if the dive was an air dive. NOTE: Log Data 3 only displays for nitrox
HINWEIS: Die Tiefenstopp-Funktion funktioniert
dives; it is bypassed if the dive was an air dive.
dives; it is bypassed if the dive was an air dive. dives; it is bypassed if the dive was an air dive.
to
nur im Norm-Modus innerhalb der Nullzeiten.
Data 3
screen. Within this screen you can change the gas mix from
2
screen. Within this screen you can change the gas mix from
NOTE: Log Data 3 only displays for nitrox 2 NOTE: Log Data 3 only displays for nitrox NOTE: Log Data 3 only displays for nitrox
NOTE: Log Data 3 only displays for nitrox NOTE: Log Data 3 only displays for nitrox
dives; it is bypassed if the dive was an air dive. dives; it is bypassed if the dive was an air dive. dives; it is bypassed if the dive was an air dive.
dives; it is bypassed if the dive was an air dive. dives; it is bypassed if the dive was an air dive.
screen. Within this screen you can change the gas mix from
2
screen. Within this screen you can change the gas mix from
2
(% O ). Nitrox mixes are displayed with their corresponding
2 2
Alarm setting, it can be changed in the scre
2
Set Gas 1 PO
Set Gas 1 PO
Set Gas 1 PO Set Gas 1 PO
Einstellen Gas 1 PO
Set Gas 1 FO Set Gas 1 PO
PO2 Alarm
PO2 Alarm
PO2 Alarm PO2 Alarm
setting
setting
setting setting
PO Alarm
PO2 Alarm PO2 Alarm PO2 Alarm
2
Einstellung ADV
PO2 Alarm current PO2 Alarm
setting setting setting
ADV
PO2 Alarm setting setting
adjust PO2
adjust PO2
setting
adjust PO2 setting adjust PO2
setting
setting setting
ADV
ADV
adjust PO2 adjust PO2 adjust PO2
EINSTELLEN
adjust FO2 adjust PO2 adjust PO2
setting setting setting
FO -
setting 2 setting setting
2
Einstellung
and PO are similar to Set Gas 1.
2
% O2 Satura-
% O Sättigung
% O2 Satura-
2
% O2 Satura- % O2 Satura- tion
am Endes des
Log Data 3 tion
tion tion
at end of dive,
Tauchgangs, - - wenn
Log Data 3
at end of dive,
at end of dive, - - if the dive at end of dive,
der Tauchgang zu
- - if the dive
- - if the dive - - if the dive entered
einem Verstoß-Gauge-
entered
entered entered
Modus geführt hat Violation
Violation
% O2 Satura- % O2 Satura- % O2 Satura-
Violation Gauge Mode Violation
Gauge Mode
% O2 Satura- % O2 Satura-
tion tion tion
Gauge Mode Gauge Mode
tion tion
at end of dive, at end of dive, at end of dive,
gas mix
gas mix
Gasgemisch
at end of dive, at end of dive,
- - if the dive - - if the dive - - if the dive
gas mix gas mix
FO2 (% O2)
FO2 (% O2)
FO (% O )
- - if the dive - - if the dive
entered entered entered
2 2
FO2 (% O2) FO2 (% O2)
entered entered
Violation Violation Violation
Violation Violation
Gauge Mode Gauge Mode Gauge Mode
Gauge Mode Gauge Mode
gas mix gas mix gas mix
gas mix gas mix
FO2 (% O2) FO2 (% O2) FO2 (% O2)
ADV SEL
FO2 (% O2) FO2 (% O2)
ADV SEL SEL
to
to
to to Main Menu
zum
Main Menu
Main Menu Main Menu
Hauptmenü
SEL SEL SEL
SEL SEL
to to to
to to
Main Menu Main Menu Main Menu
Main Menu Main Menu
screen. Within thi
2
Set Gas 1 PO
2
2
Set Gas 1 PO
2 2
Set Gas 1 PO
2 2 2
2
Set Gas 1 PO
2 2 2 FO2 (O2%)
FO2 (O2%)
FO2 (O2%) FO2 (O2%) setting
setting
MOD setting setting
FO (O %)
FO2 (O2%) FO2 (O2%) FO2 (O2%)
2 2
Einstellung
FO2 (O2%) FO2 (O2%) FO2 (O2%)
ADV setting SEL setting setting
SEL
setting setting setting
ADV SEL SEL
save
save
save setting save
setting
setting setting
ADV ADV SEL SEL SEL
ADV ADV SEL SEL SEL
save save save
save save save
setting setting setting
Einstellung
setting setting setting
speichern
Dok. Nr. 12-5669-r01 (18.01.2019)
gas
highes
PO2
reache
during
the div
NOTE: Lo
dives; it i
PO2