Background Lighting; Battery Display - Auriol AFW 2 A1 Bedienungsanleitung

♦ In basic mode, if you press the +/MEM button 7 the
symbol is shown and the lowest measured value for indoors
and outdoors is displayed .
♦ After around 5 seconds, the current values for indoors and
outdoors will automatically be displayed .
Press and hold the +/MEM button 7 for around 3 seconds
♦
to delete the saved values .

Background lighting

The background lighting on the display switches off after around
10 seconds during battery operation to save the batteries .
♦ Press the SNOOZE/LIGHT button 9 to switch the display
background lighting on for around 10 seconds .
The display background lighting is permanently switched on
when the device is powered by the mains .
♦ Press the SNOOZE/LIGHT button 9 again to set the
background lighting brightness in four stages (high,
medium, low, off) .

Battery display

If the battery symbol
panel 2 the batteries in the weather station should be replaced
as soon as possible (see also the section Operating the weather
station) .
If the battery symbol
panel 3 the batteries in the outdoor sensor should be replaced
as soon as possible (see also section Operating the outdoor
sensor) .
│ GB │ IE
■ 58
is shown on the indoor temperature
is shown on the outdoor temperature
AFW 2 A1