Digital Type Code (Bml Sf2 - Balluff BML SF2-I2 -A- Z 5-KA Serie Betriebsanleitung

BML SF2-I2 _ _ -A/QZ _ _ - Z _ _ 5-...
Incremental magnetic encoder system
9
Type code (continued)
9.2 Digital type code (BML SF2-...-Q...)
S = Sensor head
Construction:
F2
Pole width:
2 = 2 mm
Reference signal:
0 = No signal
1 = Single signal (or fixed-periodic)
2 = Pole-periodic signal
Alignment:
1 = Longitudinal
2 = Transverse
Interface:
Q = Digital A/B (RS422)
Minimum edge distance:
11 = 0.11 µs 26 = 0.26 µs
94 = 0.94 µs N1 = 1.8 µs
A7 = 7 µs B4 = 14 µs
Resolution:
U1 = 1 µm U2 = 2 µm
Supply voltage:
5 = 5 V DC
Electrical connection:
KA_ _ = PUR, shielded, standard, possible cable lengths 2, 5, 10, 15, 20 m (KA05 = 5 m cable)
KD_ _ = PUR, shielded, for drag chain, possible cable lengths 2, 5, 10, 15, 20 m (KD05 = 5 m cable)
KF_ _ = PUR, shielded, for fixed routing, possible cable lengths 2, 5, 10, 15, 20 m (KF05 = 5 m cable)
KA00,3-S284 = PUR, shielded, 0.3 m cable length, with M12 plug
www.balluff.com
BML - SF2 - I211 - QZ29 - ZU25 - KA05
42 = 0.42 µs
J3 = 3.5 µs
C1 = 21 µs
UD = 10 µm UZ = 20 µm
english 29