BAM PC-TL-020-K_ _/KA_ _-4
Connection cover for magnetostrictive linear position sensor
7
Accessories
Accessories are not included in the scope of delivery and
must be ordered separately.
7.1
Installation set BAM SE-TL-010-01
The set is used for installing a BAM PC-TL-020-K/KA-04
on a BTL7-T500-...-ZA1K and is included with the cover
attachment. The installation set can be ordered separately,
since it is recommended that a new gasket and new
screws be used each time the unit is installed.
Scope of delivery
–
3 × screw M5x55
–
3 × washer
–
O-ring
8
Type code
Connection housing for BTL7-T...-DEX...-ZA1K
Electrical connection:
K05 = Cable 5 m (radial)
KA05 = Cable 5 m (axial)
Material:
4 = Stainless steel
www.balluff.com
BAM PC - TL - 020 - K05 - 4
english
13