Interface Protocol; Maintenance; Warranty - Pce Instruments Pce-Lds 70 Bedienungsanleitung

8

Interface protocol

Baud rate: 9600
Commands
Command
0x6C (ASCII = l )
0x6D (ASCII = m )
0x6E (ASCII = n )
0x63 (ASCII = c )
0x73 (ASCII = s )
Example of output when the distance is 12.345 m:
#A12.345
Error messages:
Command
#Zerror1
#Zerror2
#Zerror3
#Zerror4
#Zerror5
#Zerror6
9

Maintenance

The PCE-LDS 70 is usually maintenance-free.
Depending on the environmental conditions and the use of the meter, there may be dust and grease
residues on the case and the measurement optics.
Use a dry cloth for cleaning.
Bear in mind that aggressive cleaning agents such as scouring cream can damage the surface of
the case and the measurement optics.
10

Warranty

You can read our warranty terms in our General Business Terms which you can find here:
https://www.pce-instruments.com/english/terms.
Description
Laser on
Disconnect
Single measurement
Continuous measurement
Stop continuous measurement /
Laser off
Description
Outside measurement range
Reflectivity too low
Outside display range
Calculation error
Operating voltage too low
Outside temperature range
© PCE Instruments
25