Initial Operation - Pce Instruments Pce-Lds 70 Bedienungsanleitung

6

Initial operation

Starten the software
Before being able to use the PCE software, you have to set the correct COM port once. To do so,
follow these steps:
1. In the main menu, click on the button
2. Select the right port which the PCE-LDS 70 is connected to from the COM PORT
dropdown menu.
3. After confirming the data by clicking on the button
menu.
4. In the main menu, click on the
meter and the computer. The icon on the button will then be filled:
. You will see the main menu.
button to establish a connection between the
© PCE Instruments
22
.
, you will get back to the main
.