Getting Started; Pc Software Installation - Pce Instruments Pce-Lds 70 Bedienungsanleitung

1 GND
2 TxD
3 RxD
4 V
IN
4

Getting started

4.1

PC software installation

To install the software, follow these steps:
1. Connect the USB pen drive to your computer.
Wait for the Windows AutoPlay function or execute the file „Setup.exe" on the USB pen
2.
drive.
3. Follow the instructions of the installation wizard and install the software.
Driver installation
If you use the operating system Windows 7 or higher, the driver will be installed automatically
when the device is connected.
If you have an older Windows version (Vista/XP), you must install the driver yourself.
The driver can be downloaded here:
http://www.ftdichip.com/Drivers/VCP.htm
© PCE Instruments
17