Assembly Of The Case - Pce Instruments Pce-Lds 70 Bedienungsanleitung

4.2

Assembly of the case

1. The substrate which the case of the PCE-LDS 70 is mounted on must have an even
surface and be free from vibration.
2. Use a small slot screwdriver to open the meter by prying the blue cap sidewards.
3. Drill 4 mounting holes as shown in the drawing below and fix the case with 4 mm screws.
4. Then close the case and connect the data cable and the mains plug.
ATTENTION: The laser light is visible.
© PCE Instruments
18