Safety; Identification Of Safety - Wilo Actun OPTI-MSH Einbau- Und Betriebsanleitung

English
• Inadequate installation site
• Chemical, electrical or electrochemical influences
• Wear
2.

Safety

This section contains basic indications which must be observed during the individu-
al phases of life. Failure to observe these installation and operating instructions may
endanger people, the environment as well as the product and lead to the loss of any
damages claims. A failure to observe may bring about the following dangers:
• Danger to persons due to electrical, mechanical and bacteriological effects as well as
electromagnetic fields
• Danger to the environment due to leakage of hazardous substances
• Material damage
• Failure of important functions of the product
In addition, observe the instructions and safety instructions in the following
sections!
2.1. Identification of safety instructions
In these installation and operating instructions, safety instructions are used for material
damage and personal injury. These safety instructions are illustrated differently:
• Safety instructions for personal injury start with a signal word, have a corresponding
prefixed symbol and are grayed out.
DANGER
Type and source of danger!
Impacts of the danger and instructions for prevention.
• Safety instructions for material damage start with a signal word and are represented
without a symbol.
CAUTION
Type and source of danger!
Impacts or information
48
SAFETY
WILO SE 11/2018 DIN A5