Cleaning; Storage; Disposal; Packaging - Silvercrest SGS 100 A1 Bedienungsanleitung

8. Cleaning

DANGER!
Pull out the mains plug 10 from the wall
socket before cleaning the facial sauna.
Allow the device to cool down com-
pletely before you transport or clean it.
Allow all parts to cool down before re-
moving them from the device.
WARNING! Risk of material damage!
Do not use any astringent or abrasive
cleaning agents.
Clean the device and the parts used after
every use.
• Wipe off the basic unit 6, using a light-
ly moistened cloth.
• Wipe the water container 5 with a
damp cloth and dry it.
Cleaning the parts
1. All accessory parts used such as face
mask 1, nose mask 2, aroma reser-
voir 4 and the lid 3 of the aroma reser-
voir need to be cleaned with warm
soap water.
2. Rinse off with clear water.
3. Dry off all accessory parts.

9. Storage

• Store the device in a dry place and out
of the reach of children.
10 GB

10. Disposal

This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts marked as such may not be discarded
with normal domestic waste, but must be tak-
en to a collection point for recycling electri-
cal and electronic devices. Recycling helps
to reduce the consumption of raw materials
and protect the environment.

Packaging

When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.