NOTICE
►
If the epilator head
To order a new epilator head
department (see chapter "Ordering spare parts"). Please have
the IAN number ready (see operating manual cover).
To replace the epilator head
―
Press the two restraint fixtures
time pull the epilator head
―
Press the new epilator head
Ensure that the gears on the epilator head
appliance mesh with each other. The epilator head
audibly engage.
Cleaning and Care
RISK OF ELECTRIC SHOCK
►
Before cleaning, disconnect the appliance from the mains
power adapter
main power supply.
WARNING - PROPERTY DAMAGE!
►
NEVER submerse the appliance in water or other liquids!
■
After every use clean the epilator head
cleaning brush
■
Disinfect the epilator head
it with disinfectant spray.
■
To thoroughly clean the epilator head
the appliance:
SED 3.7 F2
is damaged, discontinue all further use!
, please contact the service
, please proceed as follows:
and the mains power adapter
to remove loose hairs.
regularly by spraying and cleaning
together and at the same
upwards.
onto the appliance.
with the supplied
you can remove it from
GB │ MT
and on the
must
from the
│
73
■