sylvac PS16 V2 Bedienungsanleitung Seite 8

3.1.1 Operating features of the instrument
- The instrument has two operating modes: basic functions (direct access)
MODE
and advanced functions. In addition to the configuration functions, 2
working reference functions can be accessed, in MIN, MAX and DELTA
(TIR) mode, plus tolerance display or input of multiplication factor other
than 1:1 (see chaps. 3.3 and 3.4)
- The «favourite» key gives direct access to the function used most often
E
(see chap. 3.6)
- Sets a Preset value, reset the MIN/MAX mode, verifies a selection, and
SET
controls switching off the instrument. By default, SIS mode enables
automatic switch-off with no loss of origin (see chap. 6)
3.1.2. Personalising the functions
It is possible to activate or deactivate certain functions of the instrument.
(requires a connection, see chap. 6.2)
3.1.3. Data transmission parameters
4800Bds, 7 bits, even parity, 2 stop bits
3.2. Start, re-initialisation
Press a button.
When the instrument is used for the first time after the battery has been
changed or after it has been completely switched off (OFF), the instrument
needs to be reinitialised ( --rEF-- ). Simply insert the measuring spindle to
the end of its travel.
For a Bluetooth
3.3. Basic functions
Each short press on
MODE
MODE
MODE MODE
MODE
MODE
connection (see chap. 4).
®
gives direct access to the basic functions :
MODE
SET
SET
8
SET
SET