sylvac PS16 V2 Bedienungsanleitung Seite 13

Connection :
1 Activate Bluetooth
2 Start the instrument. By default the Bluetooth
is available for connection (advertising mode)
3 If no connection is established during the advertisement period reactivate the
Bluetooth module using the bt / On menu.
®
4 Instrument is ready to communicate (connected mode)
Only with paired profile :
Pairing with master is automatically done at first connection.
To connect the instrument to a new master (new pairing), pairing information on the
instrument must be cleared using the bt / rESEt menu.
4.1. Bluetooth specifications
®
Frequency Band
Modulation
Max Output Power
Range
Battery life
Other specifications on the manufacturer's website.
5. Adjusting the 3 points measurement system (for 3 point model)
To adjust the 3 points measurement system, select the 3 Pts ON menu and then
briefly press
MODE
3 pts
MODE
MODE
MODE
MODE
Smart compatible software and hardware (Master : PC, Display Unit)
®
Continuous : up to 2 months - Always connected with 4 values /sec.
Saver : up to 5 months - The instrument sends value only when the
position has changed.
Blind/Push : up to 7 months - Value is sent from the instrument (button)
or requested from the computer.
.
On
00. 5 000
04. 0 020
08. 0 000
module is active and the instrument
®
2.4GHz (2.402 - 2.480GHz)
GFSK (Gaussian Frequency Shift Keying)
Class 3: 1mW (0dBm)
Open space: up to 15m
Industrial environment: 1-5m
Off
Enter the diameter of the pins
next digit
Enter the diameter of master gauge 1
13
0...9 save the value.
SET MODE
E