sylvac PS16 V2 Bedienungsanleitung Seite 14

5. Adjusting the 3 points measurement system (continued)
E
The PS16 is ready to measure. The rEF 1 and rEF 2 reference presets (PrE function)
are set to the value of the two gauges.
the display will return to measurement mode as soon as the measurement probe is
1)
moved, to allow for ideal gauge positioning.
6. Switching off
The dial gauge goes automatically into stand-by if not used for 10 minutes, unless
automatic switch-off mode has been turned off (see Chap. 3.4, advanced functions)
Stand-by mode can be forced by a prolonged press (> 2 sec) on
In stand-by mode, the value of the origin is retained by the sensor (SIS mode),
and the instrument automatically restarts with any movement of the measurement
probe, RS command, Bluetooth
The instrument can be switched off completely for a long period of non-use, but
this will necessitate a zero reset on restart (the origin will be lost) :
Prolonged press (>4 sec) on
00. 5 000
00. 5 000
04. 0 020
MODE
MODE MODE
04. 0 020
04. 0 020 08. 0 000
MODE
MODE SET
08. 0 000
4. 0 02
08. 0 000
SET
SET
SET
4. 0 02
8. 0 00 4. 0 02
SET SET
SET
8. 0 00
8. 0 00
SET
SET
12. 3 456
request or press a button.
®
SET
SET
12. 3 456
>4s
Enter the diameter of master gauge 2
Measure gauge 1
Confirm the measurement of gauge 1
Measure gauge
Confirm the measurement of gauge 2
SET
>2s
:
Off
14
1)
1)
SET